|
|
Numéro de référence | UCLAMP1211P | ||
Description | 1-Line ESD protection | ||
Fabricant | Semtech Corporation | ||
Logo | |||
1 Page
PROTECTION PRODUCTS - MicroClampTM
Description
The µClampTM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace multilayer varistors
(MLVs) in portable applications. It features large cross-
sectional area junctions for conducting high transient cur-
rents. It offers superior electrical characteristics such
as lower clamping voltage and no device degradation
when compared to MLVs. They offer desirable charac-
teristics for board level protection including fast response
time, low operating and clamping voltage, and no device
degradation.
The µClampTM1211P is in a 2-pin, RoHS/WEEE
compliant, SLP1006P2 package. It measures
1.0 x 0.6 x 0.5mm. The leads are spaced at a pitch of
0.65mm and are finished with lead-free NiPdAu. Each
device will protect one bidirectional line operating at
±12 volts. It gives the designer the flexibility to
protect single lines in applications where arrays are not
practical. They may be used to meet the ESD immunity
requirements of IEC 61000-4-2, Level 4 (±15kV air,
±8kV contact discharge). The combination of small
size and high ESD surge capability makes them ideal
for use in portable applications such as cellular
phones, digital cameras, and MP3 players.
uClamp1211P
µClampTM
1-Line EwwSwD.DatpaSrheoett4eU.ccotmion
Features
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
Ultra-small package (1.0 x 0.6 x 0.5mm)
Protects one I/O or power line
Low clamping voltage
Working voltage: ±12V
Low leakage current
Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1006P2 package
Molding compound flammability rating: UL 94V-0
Marking : Marking code
Packaging : Tape and Reel
Lead Finish: NiPdAu
RoHS/WEEE Compliant
Applications
Cellular Handsets & Accessories
Cordless Phones
Personal Digital Assistants (PDAs)
Notebooks & Handhelds
Portable Instrumentation
Digital Cameras
Peripherals
MP3 Players
Dimensions
Schematic & PIN Configuration
1.0
0.65
0.60
0.50
Maximum Dimensions (mm)
Revision 08/23/2007
1
SLP1006P2 (Bottom View)
www.semtech.com
|
|||
Pages | Pages 7 | ||
Télécharger | [ UCLAMP1211P ] |
No | Description détaillée | Fabricant |
UCLAMP1211P | 1-Line ESD protection | Semtech Corporation |
UCLAMP1211Z | 1-Line ESD Protection | Semtech |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |