DataSheetWiki


UCLAMP0501P fiches techniques PDF

Semtech Corporation - 1-Line ESD protection

Numéro de référence UCLAMP0501P
Description 1-Line ESD protection
Fabricant Semtech Corporation 
Logo Semtech Corporation 





1 Page

No Preview Available !





UCLAMP0501P fiche technique
PROTECTION PRODUCTS - MicroClampTM
Description
The µClampTM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace multilayer varistors
(MLVs) in portable applications such as cell phones, note-
book computers, and PDAs. It features large cross-sec-
tional area junctions for conducting high transient cur-
rents. It offers superior electrical characteristics such
as lower clamping voltage and no device degradation
when compared to MLVs. They offer desirable charac-
teristics for board level protection including fast response
time, low operating and clamping voltage, and no device
degradation.
The µClampTM0501P is in a 2-pin, RoHS/WEEE compli-
ant, SLP1006P2 package. It measures 1.0 x 0.6 x
0.5mm. The leads are spaced at a pitch of 0.65mm
and are finished with lead-free NiPdAu. Each device
will protect one line operating at 5 volts. It gives the
designer the flexibility to protect single lines in applica-
tions where arrays are not practical. They may be used
to meet the ESD immunity requirements of IEC 61000-
4-2, Level 4 (±15kV air, ±8kV contact discharge). The
combination of small size and high ESD surge capability
makes them ideal for use in portable applications such
as cellular phones, digital cameras, and MP3 players.
uClamp0501P
µClampTM
1-Line EwwSwD.DatpaSrheoett4eU.ccotmion
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package (1.0 x 0.6 x 0.5mm)
‹ Protects one I/O or power line
‹ Low clamping voltage
‹ Working voltage: 5V
‹ Low leakage current
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1006P2 package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.0 x 0.6 x 0.5 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code, cathode band
‹ Packaging : Tape and Reel
Applications
‹ Cellular Handsets & Accessories
‹ Personal Digital Assistants (PDAs)
‹ Notebooks & Handhelds
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
‹ MP3 Players
Dimensions
Schematic & PIN Configuration
1.0
0.65
0.60
2
10.50
Nominal Dimensions (mm)
SLP1006P2 (Bottom View)
Revision 10/11/2007
1
www.semtech.com

PagesPages 7
Télécharger [ UCLAMP0501P ]


Fiche technique recommandé

No Description détaillée Fabricant
UCLAMP0501H 1-Line ESD protection Semtech Corporation
Semtech Corporation
UCLAMP0501P 1-Line ESD protection Semtech Corporation
Semtech Corporation
UCLAMP0501T 1-Line ESD protection Semtech Corporation
Semtech Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche