DataSheetWiki


VJ1206 fiches techniques PDF

Vishay - Multilayer Ceramic Chip Capacitors

Numéro de référence VJ1206
Description Multilayer Ceramic Chip Capacitors
Fabricant Vishay 
Logo Vishay 





1 Page

No Preview Available !





VJ1206 fiche technique
www.vishay.com
VJ OMD Series
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
• Open Mode Design (OMD) reduces risk of
shorts or leakage in board flex applications
• Excellent reliability and thermal shock
performance
• Efficient low-power consumption, ripple
current capable to 1.2 ARMS at 100 kHz
• High voltage breakdown compared to
standard design
• 100 % voltage conditioning available up to
630 VDC rating (process code “5H”)
Contact [email protected] for higher voltages.
Available
• Polymer termination available for intensive board flex
requirements
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Demanding boardflex applications
• Input filter capacitors
• Output filter capacitors
• Snubber capacitors reduce MOSFET voltage spikes
• Filtering for switching power supplies
• For lighting and other AC applications please contact:
ELECTRICAL SPECIFICATIONS
C0G (NP0)
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
X7R
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 47 nF
Capacitance Range: 100 pF to 1.8 μF
Voltage Range: 50 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
at +25 °C 100 000 Mmin. or 1000 F whichever is less
at +125 °C 10 000 Mmin. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E
Applied test voltages
200 VDC-rated:
500 VDC-rated:
630 VDC / 1000 VDC-rated:
1500 VDC to 3000 VDC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
120 % of rated voltage
Voltage Range: 16 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
< 50 V ratings 3.5 % maximum at 1.0 VRMS and 1 kHz
50 V ratings 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 Mmin. or 1000 F whichever is less
at +125 °C 10 000 Mmin. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E
Applied test voltages
250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC / 1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated: 120 % of rated voltage
Revision: 31-Jan-17
1 Document Number: 45198
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PagesPages 15
Télécharger [ VJ1206 ]


Fiche technique recommandé

No Description détaillée Fabricant
VJ1206 Multilayer Ceramic Chip Capacitors Vishay
Vishay

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche