DataSheet.es    


PDF LC75808E Data sheet ( Hoja de datos )

Número de pieza LC75808E
Descripción 1/8 to 1/10 Duty LCD Display Drivers with Key Input Function
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de LC75808E (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! LC75808E Hoja de datos, Descripción, Manual

Ordering number : ENN6370A
CMOS IC
LC75808E, 75808W
1/8 to 1/10 Duty LCD Display Drivers
with Key Input Function
Overview
The LC75808E and LC75808W are 1/8 to 1/10 duty LCD
display drivers that can directly drive up to 600 segments
and can control up to four general-purpose output ports.
These products also incorporate a key scan circuit that
accepts input from up to 30 keys to reduce printed circuit
board wiring.
Features
• Key input function for up to 30 keys (A key scan is
performed only when a key is pressed.)
• 1/8duty–1/4bias, 1/9duty–1/4bias, and 1/10duty–1/4bias
drive schemes can be controlled from serial data.
1/8duty–1/4bias: up to 480 segments
1/9duty–1/4bias: up to 540 segments
1/10duty–1/4bias: up to 600 segments
• Sleep mode and all segments off functions that are
controlled from serial data.
• Serial data I/O supports CCB format communication
with the system controller.
• Direct display of display data without the use of a
decoder provides high generality.
• Built-in display contrast adjustment circuit.
• Up to 4 general-purpose output ports are included.
• Independent LCD driver block power supply VLCD.
• Provision of an on-chip voltage-detection type reset
circuit prevents incorrect displays.
• The INH pin is provided. This pin turns off the display,
disables key scanning, and forces the general-purpose
output ports to the low level.
• RC oscillator circuit.
Package Dimensions
unit: mm
3151-QFP100E
[LC75808E]
0.575
80
81
0.65
23.2
20.0
0.3
1.6
0.575
51
50
0.15
100
1
31
30
0.1
2.7
21.6 0.8
SANYO: QFP100E
unit: mm
3181B-SQFP100
[LC75808W]
1.0 0.5
75
16.0
14.0
1.0
51
76
50
0.145
100
1
0.2
26
25 0.1
1.4
0.5 0.5
SANYO: SQFP100
• CCB is a trademark of SANYO ELECTRIC CO., LTD.
• CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
31000RM (OT)/12800RM No. 6370 -1/39

1 page




LC75808E pdf
LC75808E, 75808W
1. When CL is stopped at the low level
To the common and segment drivers
Figure 1
Excluding these resistors.
2. When CL is stopped at the high level
Figure 2
No. 6370 -5/39

5 Page





LC75808E arduino
y When CL is stopped at the high level.
• When the display data is transferred.
LC75808E, 75808W
Display data
Fixed data
Display data
Fixed data
Display data
Fixed data
• When the control data is transferred.
Display data
Fixed data
Note: B0 to B3,A0 to A3 ........ CCB address
DD ................................ Direction data
• CCB address: ...... 42H
• D1 to D540: ........ Display data
• KC1 to KC6: ........ Key scan output state setting data
• PC1 to PC4: ........ General-purpose output port state setting data
• CT0 to CT3, CTC: Display contrast setting data
• SC: ...................... Segment on/off control data
• SP: ...................... Normal mode/sleep mode control data
• DT1, DT2: ............ Display technique setting data
Control data
No. 6370 -11/39

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet LC75808E.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LC758081/8 to 1/10 Duty LCD Display Drivers with Key Input FunctionSanyo Semicon Device
Sanyo Semicon Device
LC75808E1/8 to 1/10 Duty LCD Display Drivers with Key Input FunctionSanyo Semicon Device
Sanyo Semicon Device
LC75808W1/8 to 1/10 Duty LCD Display Drivers with Key Input FunctionSanyo Semicon Device
Sanyo Semicon Device
LC75808W1/8 to 1/10 Duty LCD Display DriverON Semiconductor
ON Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar