DataSheetWiki


PCA9543A fiches techniques PDF

NXP Semiconductors - 2-channel I2C-bus switch

Numéro de référence PCA9543A
Description 2-channel I2C-bus switch
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





PCA9543A fiche technique
PCA9543A/43B/43C
www.DataSheet4U.com
2-channel I2C-bus switch with interrupt logic and reset
Rev. 05 — 17 November 2008
Product data sheet
1. General description
The PCA9543A/43B/43C is a bidirectional translating switch, controlled by the I2C-bus.
The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Any
individual SCx/SDx channels or combination of channels can be selected, determined by
the contents of the programmable control register. Two interrupt inputs, INT0 and INT1,
one for each of the downstream pairs, are provided. One interrupt output, INT, which acts
as an AND of the two interrupt inputs, is provided.
An active LOW reset input allows the PCA9543X to recover from a situation where one of
the downstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the
I2C-bus state machine and causes all the channels to be deselected, as does the internal
power-on reset function.
The pass gates of the switches are constructed such that the VDD pin can be used to limit
the maximum high voltage which will be passed by the PCA9543X. This allows the use of
different bus voltages on each SCx/SDx pair, so that 1.8 V, 2.5 V, or 3.3 V parts can
communicate with 5 V parts without any additional protection. External pull-up resistors
pull the bus up to the desired voltage level for each channel. All I/O pins are 5 V tolerant.
The PCA9543A, PCA9543B and PCA9543C are identical except for the fixed portion of
the slave address.
2. Features
I 1-of-2 bidirectional translating switches
I I2C-bus interface logic; compatible with SMBus standards
I 2 active LOW interrupt inputs
I Active LOW interrupt output
I Active LOW reset input
I 2 address pins allowing up to 4 devices on the I2C-bus
I Alternate address versions A, B and C allow up to a total of 12 devices on the bus for
larger systems or to resolve address conflicts
I Channel selection via I2C-bus, in any combination
I Power-up with all switch channels deselected
I Low Ron switches
I Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses
I No glitch on power-up
I Supports hot insertion
I Low standby current
I Operating power supply voltage range of 2.3 V to 5.5 V

PagesPages 23
Télécharger [ PCA9543A ]


Fiche technique recommandé

No Description détaillée Fabricant
PCA9543 2-channel I2C switch with interrupt logic and reset NXP Semiconductors
NXP Semiconductors
PCA9543A PCA9543A 2-Channel I2C Bus Switch With Interrupt Logic and Reset (Rev. A) Texas Instruments
Texas Instruments
PCA9543A 2-channel I2C-bus switch NXP Semiconductors
NXP Semiconductors
PCA9543B 2-channel I2C-bus switch NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche