DataSheetWiki


IDT5T93GL04 fiches techniques PDF

Integrated Device Technology - 2.5V LVDS 1:4 GLITCHLESS CLOCK BUFFER TERABUFFER II

Numéro de référence IDT5T93GL04
Description 2.5V LVDS 1:4 GLITCHLESS CLOCK BUFFER TERABUFFER II
Fabricant Integrated Device Technology 
Logo Integrated Device Technology 





1 Page

No Preview Available !





IDT5T93GL04 fiche technique
www.DataSheet4U.com
2.5V LVDS, 1:4 GLITCHLESS CLOCK BUFFER
TERABUFFER™ II
IDT5T93GL04
General Description
Features
The IDT5T93GL04 2.5V differential clock buffer is a
user-selectable differential input to four LVDS outputs. The fanout
from a differential input to four LVDS outputs reduces loading on
the preceding driver and provides an efficient clock distribution
network. The IDT5T93GL04 can act as a translator from a
differential HSTL, eHSTL, LVEPECL (2.5V), LVPECL (3.3V),
CML, or LVDS input to LVDS outputs. A single-ended 3.3V / 2.5V
LVTTL input can also be used to translate to LVDS outputs. The
redundant input capability allows for a glitchless change-over from
a primary clock source to a secondary clock source up to 450MHz.
Selectable inputs are controlled by SEL. During the switchover,
the output will disable low for up to three clock cycles of the
previously-selected input clock. The outputs will remain low for up
to three clock cycles of the newly-selected clock, after which the
outputs will start from the newly-selected input. A FSEL pin has
been implemented to control the switchover in cases where a
clock source is absent or is driven to DC levels below the minimum
specifications.
The IDT5T9304 outputs can be asynchronously enabled/disabled.
When disabled, the outputs will drive to the value selected by the
GL pin. Multiple power and grounds reduce noise.
Guaranteed low skew: <50ps (maximum)
Very low duty cycle distortion: <100ps (maximum
High speed propagation delay: <2.2ns (maximum)
Up to 450MHz operation
Selectable inputs
Hot insertable and over-voltage tolerant inputs
3.3V/2.5V LVTTL, HSTL, eHSTL, LVEPECL (2.5V), LVPECL
(3.3V), CML or LVDS input interface
Selectable differential inputs to four LVDS outputs
Power-down mode
At power-up, FSEL should be LOW
2.5V VDD
-40°C to 85°C ambient operating temperature
Available in TSSOP package
Applications
Clock distribution
Pin Assignment
GND
PD
FSEL
VDD
Q1
Q1
Q2
Q2
VDD
SEL
G
GND
1
2
3
4
5
6
7
8
9
10
11
12
24 A2
23 A2
22 GND
21 VDD
20 Q3
19 Q3
18 Q4
17 Q4
16 VDD
15 GL
14 A1
13 A1
24-Lead TSSOP
4.4mm x 7.8mm x 1.0mm package body
G Package
Top View
IDT™ LVDS GLITCHLESS CLOCK BUFFER TERABUFFER™ II
1
IDT5T93GL04 REV. A JULY 10, 2007

PagesPages 17
Télécharger [ IDT5T93GL04 ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT5T93GL02 2.5V LVDS 1:2 GLITCHLESS CLOCK BUFFER TERABUFFER II Integrated Device Technology
Integrated Device Technology
IDT5T93GL04 2.5V LVDS 1:4 GLITCHLESS CLOCK BUFFER TERABUFFER II Integrated Device Technology
Integrated Device Technology
IDT5T93GL06 2.5V LVDS 1:6 GLITCHLESS CLOCK BUFFER TERABUFFER II Integrated Device Technology
Integrated Device Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche