|
|
PDF LA73073CL Data sheet ( Hoja de datos )
| Número de pieza | LA73073CL | |
| Descripción | Monolithic Linear IC Video Driver for DSC | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LA73073CL (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Ordering number : ENA0071
www.DataSheet4U.com
LA73073CL Monolithic Linear IC
Video Driver for DSC
Overview
LA73073CL is 75Ω Video driver for DSC.
Functions/Features
• Not requires output coupling capacity.
• Low voltage drive (VCC = 2.8V to 3.6V)
• V sag does not occur.
• Implements 6th Low Pass Filter (fc = 7.5MHz)
• Current dissipation in stand-by mode : 0µA
• Selectable amplifier gain of 6dB, 12dB and 16dB.
(Pin control (GND/Open/VCC))
• Output drive performance allows up to 75Ω output and single system.
Specitications
Maximum Ratings at Ta = 25 °C
Parameter
Symbol
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Operating temperature
Topr
Storage temperature
Tstg
∗(10×20×0.8mm) Material : Paper phenol
Conditions
Ta ≤ 80°C, ∗Mounted on a board
Recommended Operating Conditions at Ta = 25 °C
Parameter
Recommended Operating supply voltage
Operating supply voltage range
Symbol
VCCSTD
VCCRANGE
Conditions
Ratings
4.0
160
-25 to +80
-55 to +150
Unit
V
mW
°C
°C
Ratings
3.1
2.8 to 3.6
Unit
V
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
92706 / 91005 MS PC B8-8039 No.0071-1/6
1 page  
Continued from preceding page.
Pin No
Symbol
6 CLKOUT
LA73073CL
Equivalent Circuit
Voltage
+3.0V
↑↓
0V
www.DataSheet4U.com
Description
Pin : Clock output terminal
7 ND1
8 VCCN
9 VOUT
+0.5V
↑↓
-2.6V
(-VCC)
Pin7 : The terminal which transmits
an electric charge
0V
↑↓
-2.5V
(-VCC)
Pin8 : Negative VCC
0V Video output terminal
(Push-pull output Low-impedance)
10 VCC
2.9V
to
3.6V
No.0071-5/6
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet LA73073CL.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LA73073CL | Monolithic Linear IC Video Driver for DSC | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |