DataSheetWiki


A6210 fiches techniques PDF

Allegro MicroSystems - 3A 2MHz Buck-Regulating LED Driver

Numéro de référence A6210
Description 3A 2MHz Buck-Regulating LED Driver
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A6210 fiche technique
A6210
3 A, 2 MHz Buck-Regulating LED Driver
Features and Benefits
User-configurable on-time, achieving switching
frequencies up to 2.0 MHz
Brightness control through PWM of DIS pin
Minimal external components required
No output capacitor required
Wide input voltage range: 9 to 46 V
Low 0.18 V sense voltage for higher efficiency
Output Current: up to 3.0 A
Low standby current <100 μA
Thermal shutdown
Supplied in a thermally-enhanced 4 mm QFN package
Applications:
High brightness LEDs
LED driver modules, power supplies and lamps, such as
MR16 and MR11
Package 16-contact QFN (suffix EU):
4 mm × 4 mm × 0.75 mm
Description
The A6210 is a buck regulator that uses valley current-mode
control. This control scheme allows very short switch on-times
to be achieved, making it ideal for applications that require
high switching frequencies combined with high input voltages
and low output LED span voltages.
Low system cost is accomplished through high switching
frequencies of up to 2.0 MHz, allowing smaller and lower value
inductors and capacitors. In addition, few external components
are required through high levels of integration. Optimal drive
circuits minimize switching losses.
The switching frequency is maintained constant, as the on-time
is modulated by the input voltage. This feed-forward control
ensures excellent line correction. The on-time is set by an
external resistor pulled-up to the input supply.
Internal housekeeping and bootstrap supplies are provided
which require the addition of only one small ceramic capacitor.A
top-off charge pump ensures correct operation at light loads.
Internal diagnostics provide comprehensive protection against
input undervoltages and overtemperatures.
The device package is a 16-contact, 4 mm × 4 mm, 0.75 mm
nominal overall height QFN, with exposed pad for enhanced
thermal dissipation. It is lead (Pb) free, with 100% matte tin
leadframe plating.
6210-DS, Rev. 2
VIN
24 V
R1
150 kΩ
C1
1.0 μF
Typical Application
VIN BOOT
LX
TON A 6210
ISEN
PWM or Switch
DIS
SGND
NC GND
C2
22 nF
L1
68 μH
D1
R2
390 mΩ
LED1
LED2
LED3
LED span voltage = 10.5 V
Average LED current = 500 mA
Peak to peak current = 60 mA
Switching frequency = 1.4 MHz
Efficiency = 90.5%
Suggested Parts
Name Description
C1 1 μF, 25V, X5R or X7R ceramic, 1210
C2 22 nF, 50V, X5R or X7R ceramic, 0805
D1 1 A, 30 V, Schottky diode
L1 68 μH, 1 A inductor
R1 180 kΩ, 1%, 0805
R2 390 mΩ, 1%, 0805
Manufacturer - Part Number
Taiyo Yuden, TDK
Taiyo Yuden - NR 6045T 680M

PagesPages 12
Télécharger [ A6210 ]


Fiche technique recommandé

No Description détaillée Fabricant
A6210 3A 2MHz Buck-Regulating LED Driver Allegro MicroSystems
Allegro MicroSystems
A6211 Constant-Current 3-Ampere PWM Dimmable Buck Regulator LED Driver Allegro
Allegro
A6213 Constant-Current 3-Ampere PWM Dimmable Buck Regulator LED Driver Allegro
Allegro
A6217 PWM Dimmable Buck Regulator LED Driver Allegro
Allegro

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche