DataSheetWiki


14FMS-1.0SP-TF fiches techniques PDF

JST - Connector

Numéro de référence 14FMS-1.0SP-TF
Description Connector
Fabricant JST 
Logo JST 





1 Page

No Preview Available !





14FMS-1.0SP-TF fiche technique
1.0mm
(.039") pitch
FMS CONNECTOR
Connectors for FFC
Emboss Tape
www.DataSheet4U.com
Features ––––––––––––––––––––––––
The FMS series connectors are designed
for surface mounting (SMT) and to meet the
demand for high-density packaging. They
are miniature connectors with a height of
only 2.8mm (.110"), and can be supplied
packaged in embossed tape to facilitate
automatic mounting.
• Compact
This connector measures 1.0mm (.039") in pitch, 2.8mm (.110")
in mounting height, and 6.3mm (.248") in width.
• Double-sided contact
This connector has highly resilient phosphor bronze contacts,
each of which has two independent mating spring members
that ensure continuity even when subjected to severe vibration.
Because each of the contacts simultaneously mates with both
sides of the FFC, the engineer has greater freedom in designing
his circuitry.
• Simple snap-in action
The FFC is securely connected by simply inserting its leads
into the connector.
• SMT configuration
Its housing is made of heat resistant resin so that it is not
adversely affected during reflow soldering. Because of its tiny
size and ability to be surface mounted, this connector meets
the demand for high-density mounting of components inside
electronic products.
• Solder tabs
This connector also features reinforcing solder tabs to prevent
lifting of the connector during mating and unmating.
542
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m max.
After environmental testing/30m max.
• Insulation resistance: 800M min.
• Withstanding voltage: 500V AC/minute
• Applicable FFC: Lead pitch /1.0mm(.039")
Lead width /0.7mm(.028")
Mating part thickness /
0.30 ± 0.05mm(.012"± .002")
<Note>FFC to be actually used should be checked for applicability.
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812

PagesPages 3
Télécharger [ 14FMS-1.0SP-TF ]


Fiche technique recommandé

No Description détaillée Fabricant
14FMS-1.0SP-TF Connector JST
JST

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche