DataSheetWiki


VND5E025MK-E fiches techniques PDF

ST Microelectronics - Double channel high-side driver

Numéro de référence VND5E025MK-E
Description Double channel high-side driver
Fabricant ST Microelectronics 
Logo ST Microelectronics 





1 Page

No Preview Available !





VND5E025MK-E fiche technique
VND5E025MK-E
Double-channel high-side driver with analog current sense
for automotive applications
Features
Max transient supply voltage
VCC 41 V
Operating voltage range
VCC 4.5 to 28 V
Max on-state resistance (per ch.) RON 25 mΩ
Current limitation (typ)
Off-state supply current
ILIMH
IS
60 A
2 µA(1)
1. Typical value with all loads connected.
General
– Inrush current active management by
power limitation
– Very low standby current
– 3.0V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
– Very low current sense leakage
Diagnostic functions
– Proportional load current sense
www.DataSheet4UH.ciogmh current sense precision for wide
currents range
– Current sense disable
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of VCC
– Overtemperature shutdown with auto
restart (thermal shutdown)
PowerSSO-24
– Reverse battery protected (see Figure 29:
Application schematic(1))
– Electrostatic discharge protection
Applications
All types of resistive, inductive and capacitive
loads
Suitable as LED driver
Description
The VND5E025MK-E is a double-channel high-
side drivers manufactured in the ST proprietary
VIPower™ M0-5 technology and housed in the
tiny PowerSSO-24 package.
The VND5E025MK-E is designed to drive 12V
automotive grounded loads delivering protection,
diagnostics and easy 3V and 5V CMOS
compatible interface with any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with
auto-restart and overvoltage active clamp.
A dedicated analog current sense pin is
associated with every output channel in order to
provide Enhanced diagnostic functions including
fast detection of overload and short-circuit to
ground through power limitation indication and
overtemperature indication.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices.
October 2009
Doc ID 16471 Rev 1
1/35
www.st.com
1

PagesPages 30
Télécharger [ VND5E025MK-E ]


Fiche technique recommandé

No Description détaillée Fabricant
VND5E025MK-E Double channel high-side driver ST Microelectronics
ST Microelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche