DataSheetWiki


ADP2118 fiches techniques PDF

Analog Devices - 1.2 MHz/600 kHz High Efficiency Synchronous Step-Down DC-to-DC Converter

Numéro de référence ADP2118
Description 1.2 MHz/600 kHz High Efficiency Synchronous Step-Down DC-to-DC Converter
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADP2118 fiche technique
3 A, 1.2 MHz/600 kHz High Efficiency
Synchronous Step-Down DC-to-DC Converter
ADP2118
FEATURES
3 A continuous output current
75 mΩ and 40 mΩ integrated FET
±1.5% output accuracy
Input voltage range from 2.3 V to 5.5 V
Output voltage from 0.6 V to VIN
600 kHz or 1.2 MHz fixed switching frequency
Synchronizable between 600 kHz and 1.4 MHz
Selectable synchronize phase shift: 0o or 180o
Selectable PWM or PFM mode operation
Current mode architecture
Precision enable input
Power good output
Voltage tracking input
Integrated soft start
Internal compensation
Starts up into a precharged output
UVLO, OVP, OCP, and thermal shutdown
Available in 16-lead 4mm × 4mm LFCSP_WQ package
APPLICATIONS
DSP/FPGA/ASIC core power
Telecommunication/networking equipment
PDAs and palmtop computers
Audio/video consumer electronics
GENERAL DESCRIPTION
The ADP2118 is a low quiescent current, synchronous, step-down,
dc-to-dc converter in a compact 4mm × 4mm LFCSP_WQ
package. It uses a current mode, constant frequency pulse-width
modulation (PWM) control scheme for excellent stability and
transient response. Under light loads, the ADP2118 can be
configured to operate in pulse frequency modulation (PFM)
mode that reduces switching frequency to save power.
The ADP2118 runs from input voltages of 2.3 V to 5.5 V. The
output voltage of the ADP2118ACPZ-R7 is adjustable from
0.6 V to input voltage (VIN), and the ADP2118ACPZ-x.x-R7 are
available in preset output voltage options of 3.3 V, 2.5 V, 1.8 V,
1.5 V, 1.2 V, and 1.0 V. The ADP2118 requires minimal external
parts and provides a high efficiency solution with its integrated
power switch, synchronous rectifier, and internal compensation.
The IC draws less than 3 μA from the input source when it is
disabled. Other key features include undervoltage lockout
(UVLO), integrated soft start to limit inrush current at startup,
overvoltage protection (OVP), overcurrent protection (OCP),
and thermal shutdown (TSD).
www.DataSheet4U.com
R2
10k
16
C1
0.1µF
R1
10
15 14 13
CIN
100µF
X5R,
6.3V
VIN
5V
1 SYNC/MODE
2 FREQ
3 TRK
ADP2118
4 FB
PVIN 12
SW 11
SW 10
SW 9
L
1µH
VOUT
COUT
100µF
3.3V
3A
X5R,
6.3V
RBOT RTOP
2.21k10k
5678
Figure 1. Typical Applications Circuit
100
90
80
70
60
50
40
30
20
10
0
0.01
PFM OPERATION
FPWM OPERATION
VfVSION=U=T1.5=2VM3.H3Vz
0.1 1 10
OUTPUT CURRENT (A)
Figure 2. Efficiency vs. Output Current
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.

PagesPages 24
Télécharger [ ADP2118 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADP2114 Synchronous Step-Down DC-to-DC Regulator Analog Devices
Analog Devices
ADP2116 Step-Down DC-to-DC Regulator Analog Devices
Analog Devices
ADP2118 1.2 MHz/600 kHz High Efficiency Synchronous Step-Down DC-to-DC Converter Analog Devices
Analog Devices
ADP2119 Step-Down DC-to-DC Regulators Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche