|
|
Número de pieza | HMC773 | |
Descripción | GaAs MMIC FUNDAMENTAL MIXER | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC773 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v01.0909
Typical Applications
The HMC773 is ideal for:
• Point-to-Point Radios
• Point-to-Mulit-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
4
Functional Diagram
www.DataSheet4U.com
HMC773
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
Features
Passive: No DC Bias Required
High Input IP3: +22 dBm
High LO/RF Isolation: 38 dB
Wide IF Bandwidth: DC - 10 GHz
Upconversion & Downconversion Applications
Die Size: 1.37 x 0.96 x 0.1 mm
General Description
The HMC773 is a general purpose double balanced
mixer chip that can be used as an upconverter or
downconverter between 6 and 26 GHz. This mixer
requires no external components or matching cir-
cuitry. The HMC773 provides excellent LO to RF and
LO to IF isolation due to optimized balun structures.
The mixer operates with LO drive levels of +13 dBm.
The HMC773 wideband mixer exhibits consistent
conversion gain and compression across its band-
width. The HMC773 is also available in SMT format as
the HMC773LC3B.
Electrical Specifications, TA = +25° C, IF = 0.5 GHz, LO = +13 dBm*
Parameter
Min. Typ. Max. Min. Typ.
Frequency Range, RF & LO
6 - 16
16 - 26
Frequency Range, IF
DC - 10
DC - 10
Conversion Loss
9 12
9
LO to RF Isolation
37 38
LO to IF Isolation
31 37
20 30
RF to IF Isolation
5 11
8 18
IP3 (Input)
18 22
IP2 (Input)
45 50
1 dB Gain Compression (Input)
10 12
* Unless otherwise noted, all measurements performed as downconverter, IF = 0.5 GHz, LO = +13 dBm
Max.
11
Units
GHz
GHz
dB
dB
dB
dB
dBm
dBm
dBm
4 - 84
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page 4
Pad Descriptions
Pad Number
Function
1 LO
v01.0909
HMC773
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
Description
This pin is DC coupled
and matched to 50 Ohms.
Interface Schematic
2 RF
This pin is DC coupled
and matched to 50 Ohms.
3 IF
Assembly Diagram
This pin is DC coupled. For applications not requiring opera-
tion to DC, this port should be DC blocked externally using a
series capacitor whose value has been chosen to pass the
necessary IF frequency range. For operation to DC, this pin
must not source or sink more than 2 mA of current or part
non-function and possible part failure will result.
www.DataSheet4U.com
4 - 88
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC773.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC770LP4BE | GaAs pHEMT 50 / 75 Ohm DIFFERENTIAL AMPLIFIER | Hittite Microwave Corporation |
HMC772LC4 | GaAs HEMT MMIC LOW NOISE AMPLIFIER | Hittite Microwave Corporation |
HMC773 | GaAs MMIC FUNDAMENTAL MIXER | Hittite Microwave Corporation |
HMC773ALC3B | GaAs MMIC FUNDAMENTAL MIXER | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |