|
|
PDF HMC876LC3C Data sheet ( Hoja de datos )
| Número de pieza | HMC876LC3C | |
| Descripción | 20 Gbps Clocked COMPARATOR | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC876LC3C (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
HMC876LC3C
v01.1009
20 Gbps Clocked COMPARATOR
with RSECL OUTPUT STAGE
Typical Applications
6 The HMC876LC3C is ideal for:
• ATE Applications
• High Speed Instrumentation
• Digital Receiver Systems
• Pulse Spectroscopy
• High Speed Trigger Circuits
• Clock & Data Restoration
Functional Diagram
www.DataSheet4U.com
Features
Propagation Delay Clock to Output: 120 ps
Overdrive & Slew Rate Dispersion: 10 ps
Minimum Pulse Width: 60 ps
Resistor Programmable Hysteresis
Differential Clock Control
Input Bandwidth: 10 GHz
Power Dissipation: 150 mW
RSCML and RSPECL Versions Available
16 Lead 3x3mm SMT Package: 9mm2
General Description
The HMC876LC3C is a SiGe monolithic, ultra fast
comparator which features reduced swing ECL output
drivers and clock inputs. The comparator supports 20
Gbps operation while providing 120 ps clock to data
output delay and 60 ps minimum pulse width with 0.2
ps rms random jitter (RJ). 25 Gbps operation can be
achieved with reduced output voltage swing. Overdrive
and slew rate dispersion are typically 10 ps, making the
device ideal for a wide range of applications from ATE
to broadband communications. The reduced swing
ECL output stage is designed to directly drive 400 mV
into 50 Ohms terminated to -2V. The HMC876LC3C
features high speed latches with programmable
hysteresis, and is configured to operate as a clocked
comparator.
6 - 66
Electrical Specifications
TA = +25C[1], Vcci = +3.3V, Vcco = 0V, CLK/ CLK = 1.6 to 2.4V, Vee = -3V, VTERM = -2V
Parameter
Conditions
Min. Typ. Max
Input Voltage Range
-2 2
Input Differential Voltage
-1.75
1.75
Input Offset Voltage
±5
Input Offset Voltage, Temperature Coefficient
15
Input Bias Current
15
Input Bias Current Temperature Coefficient
50
Input Offset Current
4
Input Impedance
50
Common Mode Input Impedance
350
Differential Input Impedance
15
Hysteresis
Rhys = ∞
±1
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Units
V
V
mV
μV / °C
uA
nA / °C
μA
Ω
KΩ
KΩ
mV
1 page  
Timing Diagram
6
v01.1009
HMC876LC3C
20 Gbps Clocked COMPARATOR
with RSECL OUTPUT STAGE
Outline Drawing
www.DataSheet4U.com
6 - 70
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST NOT BE DC GND. THERMAL DISSIPATION PATH ONLY.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC876LC3C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC876LC3C | 20 Gbps Clocked COMPARATOR | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |