|
|
PDF HMC849LP4CE Data sheet ( Hoja de datos )
| Número de pieza | HMC849LP4CE | |
| Descripción | HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC849LP4CE (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.0909
HMC849LP4CE
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Typical Applications
The HMC849LP4CE is ideal for:
• Cellular/4G Infrastructure
• WiMAX, WiBro & Fixed Wireless
• Automotive Telematics
• Mobile Radio
• Test Equipment
Functional Diagram
11
www.DataSheet4U.com
Features
High Isolation: up to 60 dB
Single Positive Control: 0/+3V to +5V
High Input IP3: +52 dBm
Non-Reflective Design
“All Off” State
24 Lead 4x4 mm QFN Package: 16 mm2
General Description
The HMC849LP4CE is a high isolation non-reflec-
tive DC to 6 GHz GaAs pHEMT SPDT switch in a low
cost leadless surface mount package. The switch is
ideal for cellular/WiMAX/4G Infrastructure applicati-
ons yielding up to 60 dB isolation, low 0.8 dB inser-
tion loss and +52 dBm input IP3. Power handling
is excellent up through the 5 - 6 GHz WiMAX band
with the switch offering a P1dB compression point of
+31 dBm. On-chip circuitry allows a single positive
voltage control of 0/+3V or 0/+5V at very low DC
currents. An enable input (EN) set to logic high will put
the switch in an “all off” state.
11 - 238
Electrical Specifications, TA = +25 °C, Vctl = 0/Vdd, Vdd = +3V to +5V, 50 Ohm System
Insertion Loss
Parameter
Isolation (RFC to RF1/RF2)
Return Loss (On State)
Return Loss (Off State)
Input Power for 1 dB Compression
+3V
+5V
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone)
Switching Speed
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
Frequency
DC - 2.0 GHz
2.0 - 4.0 GHz
4.0 - 6.0 GHz
DC - 2.0 GHz
2.0 - 4.0 GHz
4.0 - 6.0 GHz
DC - 4.0 GHz
4.0 - 6.0 GHz
DC - 6.0 GHz
0.35 - 4.0 GHz
DC - 6.0 GHz
DC - 4.0 GHz
Min.
53
48
40
29
34
Typ.
Max.
Units
0.8 1.3
1.0
1.7
1.5
2.5
dB
dB
60
55
52
dB
dB
17 dB
13 dB
15 dB
30 dBm
35 dBm
52 dBm
80 ns
150 ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.0909
HMC849LP4CE
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Pin Descriptions
Pin Number
1
Function
Vdd
Description
Supply Voltage.
2 Vctl Control input. See truth and control voltage tables.
Interface Schematic
11
3, 9, 12
4, 6, 7, 8,
13, 14, 15, 16
RFC, RF1, RF2
N/C
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
5 EN Enable. See truth and control voltage tables.
10, 11
GND
Package bottom must also be
connected to PCB RF ground.
www.DataShAeept4pUl.iccomation Circuit
11 - 242
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC849LP4CE.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC849LP4CE | HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |