DataSheetWiki


ADG1606 fiches techniques PDF

Analog Devices - (ADG1606 / ADG1607) Multiplexers

Numéro de référence ADG1606
Description (ADG1606 / ADG1607) Multiplexers
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADG1606 fiche technique
4.5 Ω RON, 16-Channel, Differential 8-Channel,
±5 V,+12 V,+5 V, and +3.3 V Multiplexers
ADG1606/ADG1607
FEATURES
4.5 Ω typical on resistance
1.1 Ω on resistance flatness
±3.3 V to ±8 V dual supply operation
3.3 V to 16 V single supply operation
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
Up to 378 mA of continuous current per channel
28-lead TSSOP and 32-lead, 5 mm × 5 mm LFCSP_VQ
APPLICATIONS
Communication systems
Medical systems
Audio signal routing
Video signal routing
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Relay replacements
FUNCTIONAL BLOCK DIAGRAMS
ADG1606
S1
D
S16
1-OF-16
DECODER
A0 A1 A2 A3 EN
Figure 1.
ADG1607
S1A
DA
S8A
S1B
DB
S8B
1-OF-8
DECODER
A0 A1 A2 EN
Figure 2.
GENERAL DESCRIPTION
The ADG1606 and ADG1607 are monolithic iCMOS® analog
www.DamtauSlthipeleetx4eUr.scocommprising of 16 single channels and eight
differential channels, respectively. The ADG1606 switches one of
16 inputs to a common output, as determined by the 4-bit
binary address lines (A0, A1, A2, and A3). The ADG1607
switches one of eight differential inputs to a common differential
output, as determined by the 3-bit binary address lines (A0, A1,
and A2). An EN input on both devices enables or disables the
device. When disabled, all channels switch off. When enabled,
each channel conducts equally well in both directions and has an
input signal range that extends to the supplies.
The ultralow on resistance and on-resistance flatness of these
switches make them ideal solutions for data acquisition and
gain switching applications where low distortion is critical.
iCMOS® construction ensures ultralow power dissipation,
making the parts ideally suited for portable and battery-
powered instruments.
PRODUCT HIGHLIGHTS
1. 7.5 Ω maximum on resistance over temperature.
2. Minimum distortion: THD + N = 0.04%
3. 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V.
4. No VL logic power supply required.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.

PagesPages 24
Télécharger [ ADG1606 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADG1604 Resistance Analog Devices
Analog Devices
ADG1606 (ADG1606 / ADG1607) Multiplexers Analog Devices
Analog Devices
ADG1607 (ADG1606 / ADG1607) Multiplexers Analog Devices
Analog Devices
ADG1608 (ADG1608 / ADG1609) Multiplexer Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche