|
|
Numéro de référence | DDX-8001 | ||
Description | Multi-channel Digital Audio Processor | ||
Fabricant | Apogee Technology | ||
Logo | |||
1 Page
FEATURES
• 8 Channels of 24-Bit DDX®
• 100dB SNR and Dynamic Range
• 32kHz to 192kHz Input Sample Rates
• SACD/DSD Input (6 Channel)
• 24-bit to 36-bit Internal Processing
• Digital Gain/Attenuation +58dB to
–100dB in 0.5dB steps
• Up to 10 Independent 32-bit User
Programmable Biquads (EQ) per
Channel
• I2C Control
• 8 Channel I2S Inputs and Outputs
• 3.3V Single Supply Operation
• Individual Channel, Master, and
Channel Trim Gain/Attenuation
• Bass/Treble Tone Control
• Dual 8-Input Mix, Pre and Post EQ, per
channel
• Dual Independent Programmable
Limiters/Compressors
• Automodes™
* 5-Band Graphic EQ
* 32 Preset EQ Curves
* All 5.1 Bass Management Configs
* 8 Preset Crossover Filters
* Auto Volume Controlled Loudness
* 5.1 to 2 Channel Downmix
* 3 Preset Volume Curves
* 2 Preset Anti-Clipping Modes
* Preset Nighttime Listening Mode
* Preset TV AGC
www.Data•SheeInt4pUu.ctomand I2S Output Channel Mapping
• AM Noise Reduction and PWM
Frequency Shifting Modes
• Soft Volume and Muting
• Auto Zero Detect and Invalid Input
Detect Muting
• Selectable DDX® Ternary or Binary
PWM output + Variable PWM Speeds
• Internal Processing Loop-Through For
Up To 40 Biquads / 2-Channels
• QSurround5.1*
* Provided only under License of QSound Labs, Inc.
DDX-8001
DDX Multi-channel
Digital Audio Processor
1.0 GENERAL DESCRIPTION
The DDX-8001 is a single chip solution for digital audio
processing and digital amplifier control, featuring output
capabilities for DDX® (Direct Digital Amplification). In
conjunction with a DDX® power device, it provides high-
quality, high-efficiency, all digital amplification. The device
is extremely versatile allowing for input of nearly all digital
formats including 6.1/7.1 channel, 192kHz/24-bit DVD-Audio,
and SACD. In 5.1 applications the additional two channels
can be used for line-out or headphone drive.
Also provided in the DDX-8001 are a full assortment of
digital processing features. This includes up to 10
programmable 32-bit biquads (EQ) per channel, bass/treble
tone control, and dual 8-input mixing blocks per channel.
Automodes™ enable a time-to-market advantage by
substantially reducing the amount of software development
needed for certain functions. This includes all possible 5.1
bass management configurations with simple large/small/off
control settings. New advanced AM radio mode solves one
of the most common concerns using switching power
amplifiers.
The serial audio data input and output interfaces accept all
possible formats, including the popular I2S format. Eight
channels of DDX® processing are provided with capabilities
of controlling the output switching frequency or modulation.
This high quality conversion from PCM audio to DDX’s
patented tri-state PWM switching waveform provides over
100dB SNR and dynamic range.
The DDX-8001 is a 4th generation DDX® controller and is
uniquely suited for the most demanding applications,
providing an audiophile experience without parallel.
Specifications are subject to change without notice.
129 Morgan Drive, Norwood, MA 02062 voice: (781) 551-9450 fax: (781) 440-9528 email: [email protected]
CONTROLLED DOCUMENT: P_903-000040_Rev19 DDX-8001 Data Sheet.doc
DRN: PRELIMINARY Page 1 of 49
|
|||
Pages | Pages 30 | ||
Télécharger | [ DDX-8001 ] |
No | Description détaillée | Fabricant |
DDX-8001 | Multi-channel Digital Audio Processor | Apogee Technology |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |