DataSheetWiki


LC66354C fiches techniques PDF

Sanyo Semicon Device - Four-Bit Single-Chip Microcontroller with 16 KB of On-Chip EPROM

Numéro de référence LC66354C
Description Four-Bit Single-Chip Microcontroller with 16 KB of On-Chip EPROM
Fabricant Sanyo Semicon Device 
Logo Sanyo Semicon Device 





1 Page

No Preview Available !





LC66354C fiche technique
No. 5484
Preliminary
CMOS LSI
LC66354C, 66356C, 66358C
Four-Bit Single-Chip Microcontrollers
with 4, 6, and 8 KB of On-Chip ROM
Overview
The LC66354C, LC66356C, and LC66358C are 4-bit
CMOS microcontrollers that integrate on a single chip all
the functions required in a system controller, including
ROM, RAM, I/O ports, a serial interface, comparator
inputs, three-value inputs, timers, and interrupt functions.
These three microcontrollers are available in a 42-pin
package.
These products differ from the earlier LC66358A Series
and LC66358B Series in the power-supply voltage range,
the operating speed, and other points.
• Evaluation LSIs
— LC66599 (evaluation chip) + EVA85/800-TB6630X
— LC66E308 (on-chip EPROM microcontroller)
used together.
Package Dimensions
unit: mm
3025B-DIP42S
[LC66354C/66356C/66358C]
42 22
Features and Functions
• On-chip ROM capacities of 4, 6, and 8 kilobytes, and an
on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction
set (128 instructions).
• I/O ports: 36 pins
• 8-bit serial interface: two circuits (can be connected in
cascade to form a 16-bit interface)
• Instruction cycle time: 0.92 to 10 µs (at 2.5 to 5.5 V)
— For the earlier LC66358A Series: 1.96 to 10 µs (at
3.0 to 5.5 V) and 3.92 to 10 µs (at 2.2 to 5.5 V)
— For the earlier LC66358B Series: 0.92 to 10 µs (at
3.0 to 5.5 V)
• Powerful timer functions and prescalers
— Time limit timer, event counter, pulse width
measurement, and square wave output using a 12-bit
timer.
— Time limit timer, event counter, PWM output, and
square wave output using an 8-bit timer.
— Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8
interrupt vector locations.
— External interrupts: 3 factors/3 vector locations
— Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions
Comparator inputs, three-value inputs, 20-mA drive
outputs, 15-V high-voltage pins, and pull-up/open-drain
options.
• Optional runaway detection function (watchdog timer)
• 8-bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP42S, QIP48E (QFP48E)
1
37.9
21
0.95 0.48 1.78 1.15
SANYO: DIP42S
unit: mm
3156-QFP48E
[LC66354C/66356C/66358C]
17.2
14.0
1.5 1.0
36
37
1.6
1.5
25
24
0.15
48
1
0.35
13
12
0.1
2.70
(STAND OFF)
0.8 15.6
SANYO: QFP48E
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
22897HA (OT) No. 5484-1/21

PagesPages 21
Télécharger [ LC66354C ]


Fiche technique recommandé

No Description détaillée Fabricant
LC66354A 4-bit Microcontrollers with Built-in ROM Sanyo Semicon Device
Sanyo Semicon Device
LC66354A Four-Bit Single-Chip Microcontrollers with 4/ 6/ and 8 KB of On-Chip ROM Sanyo Semicon Device
Sanyo Semicon Device
LC66354A Four-Bit Single-Chip Microcontrollers with 4/ 6/ 8/ 12/ and 16 KB of On-Chip ROM Sanyo Semicon Device
Sanyo Semicon Device
LC66354A Four-Bit Single-Chip Microcontrollers with 8/ 12/ and 16 KB of On-Chip ROM Sanyo Semicon Device
Sanyo Semicon Device

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche