DataSheetWiki


FSUSB45 fiches techniques PDF

Fairchild Semiconductor - USB2.0 (480Mbps) Switch

Numéro de référence FSUSB45
Description USB2.0 (480Mbps) Switch
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FSUSB45 fiche technique
July 2008
FSUSB45 — Hi-Speed USB2.0 (480Mbps) Switch with
Dedicated Charger Port Detect
Features
ƒ Low On Capacitance: 7.0pF Typical
ƒ Low On Resistance: 3.9Typical
ƒ Low Power Consumption: 1μA Maximum
- 15μA Maximum ICCT over an Expanded Voltage
Range (VIN=1.8V, VCC=4.3V)
ƒ Wide -3db Bandwidth: > 720MHz
ƒ Packaged in:
- 10-Lead MicroPak™ (1.6 x 2.1mm)
- 10-Lead UMLP (1.4 x 1.8mm)
ƒ 8kV ESD Rating, >16kV Power/GND ESD Rating
ƒ Power-Off Protection on All Ports When VCC=0V
- D+/D- Pins Tolerate up to 5.25V
Applications
ƒ Cell Phone, PDA, Digital Camera, and Notebook
ƒ LCD Monitor, TV, and Set-top Box
IMPORTANT NOTE:
www.DataShFeoert4aUd.cdoitmional performance information, please contact
Description
The FSUSB45 is a bi-directional, low-power, two-port,
Hi-Speed, USB2.0 switch. Configured as a double-pole,
double-throw (DPDT) switch, it is optimized for
switching between two Hi-Speed (480Mbps) sources or
a Hi-Speed source and a Full-Speed (12Mbps) source.
The FSUSB45 is compatible with the requirements of
USB2.0 and features an extremely low on capacitance
(CON) of 7.0pF. The wide bandwidth of this device
(720MHz) exceeds the bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge
and phase distortion. Superior channel-to-channel
crosstalk also minimizes interference.
The FSUSB45 contains special circuitry on the switch
I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to
withstand an over-voltage condition. This device is
designed to minimize current consumption even when
the control voltage applied to the SEL pin is lower than
the supply voltage (VCC). This feature is especially
valuable to mobile applications, such as cell phones,
allowing for direct interface with the general-purpose
I/Os of the baseband processor. An additional feature is
the detection of the 1,1 state on D+/D- to signal an
interrupt (INT) to the processor when entering a
dedicated charging port mode of operation.
Figure 1. Analog Symbol
Ordering Information
Part Number
Top
Mark
Operating
Temperature Range
FSUSB45L10X JA
-40 to +85°C
FSUSB45UMX JB
-40 to +85°C
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
Eco Status
RoHS
Green
Package
10-Lead MicroPak™ 1.6 x 2.1mm,
JEDEC MO-255B
10-Lead, Quad, Ultrathin Molded Leadless
Package (UMLP), 1.4 x 1.8mm
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2007 Fairchild Semiconductor Corporation
FSUSB45 • Rev. 1.0.5
www.fairchildsemi.com

PagesPages 2
Télécharger [ FSUSB45 ]


Fiche technique recommandé

No Description détaillée Fabricant
FSUSB40 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor
FSUSB42 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor
FSUSB43 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor
FSUSB45 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche