DataSheetWiki


FSUSB43 fiches techniques PDF

Fairchild Semiconductor - USB2.0 (480Mbps) Switch

Numéro de référence FSUSB43
Description USB2.0 (480Mbps) Switch
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FSUSB43 fiche technique
December 2008
FSUSB43 — Low-Power, Two-Port, High-Speed,
USB2.0 (480Mbps) Switch
Features
ƒ Over-Voltage Tolerance (OVT) on all USB Ports
up to 5.25V without External Components
ƒ Low On Capacitance: 3.7pF Typical
ƒ Low On Resistance: 3.9Typical
ƒ Low Power Consumption: 1μA Maximum
- 20μA Maximum ICCT over an Expanded Voltage
Range (VIN=1.8V, VCC=4.3V)
ƒ Wide -3db Bandwidth: > 720MHz
ƒ Packaged in 10-Lead MicroPak™ (1.6 x 2.1mm)
ƒ 8kV ESD Rating, >16kV Power/GND ESD Rating
ƒ Power-Off Protection on All Ports when VCC=0V
- D+/D- Pins Tolerate up to 5.25V
Applications
ƒ Cell phone, PDA, Digital Camera, and Notebook
ƒ LCD Monitor, TV, and Set-Top Box
IMPORTANT NOTE:
www.DataSheet4U.com
For additional performance information, please contact
Description
The FSUSB43 is a bi-directional, low-power, two-port,
high-speed, USB2.0 switch. Configured as a double-
pole, double-throw (DPDT) switch, it is optimized for
switching between two high-speed (480Mbps) sources
or a high-speed and full-speed (12Mbps) source.
The FSUSB43 is compatible with the requirements of
USB2.0 and features an extremely low on capacitance
(CON) of 3.7pF. The wide bandwidth of this device
(720MHz) exceeds the bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge
and phase distortion. Superior channel-to-channel
crosstalk also minimizes interference.
The FSUSB43 contains special circuitry on the switch
I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to
withstand an over-voltage condition. This minimizes
current consumption even when the control voltage
applied to the SEL pin is lower than the supply voltage
(VCC). This feature is especially valuable to mobile
applications, such as cell phones, allowing for direct
interface with the general-purpose I/Os of the baseband
processor. Other applications include switching and
connector sharing in portable cell phones, PDAs, digital
cameras, printers, and notebook computers.
HSD1+
HSD2+
D+
HSD1-
HSD2-
D-
Sel Control /OE
Figure 1. Analog Symbol
Ordering Information
Part Number Top Mark Operating Temperature Range
FSUSB43L10X
JH
-40 to +85°C
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
Eco Status
Package
Green
10-Lead MicroPak™ 1.6 x
2.1mm, JEDEC MO-255B
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2008 Fairchild Semiconductor Corporation
FSUSB43 • Rev. 1.0.1
www.fairchildsemi.com

PagesPages 2
Télécharger [ FSUSB43 ]


Fiche technique recommandé

No Description détaillée Fabricant
FSUSB40 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor
FSUSB42 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor
FSUSB43 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor
FSUSB45 USB2.0 (480Mbps) Switch Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche