DataSheetWiki


FAN6754 fiches techniques PDF

Fairchild Semiconductor - Highly Integrated Green-Mode PWM Controller

Numéro de référence FAN6754
Description Highly Integrated Green-Mode PWM Controller
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FAN6754 fiche technique
September 2009
FAN6754
Highly Integrated Green-Mode PWM Controller
Brownout and Constant Power Limited by HV Pin
Features
ƒ High-Voltage Startup
ƒ AC Input Brownout Protection with Hysteresis
ƒ Low Operating Current: 1.7mA
ƒ Linearly Decreasing PWM Frequency to 22KHz
ƒ Frequency Hopping to Reduce EMI Emission
ƒ Fixed PWM Frequency: 65KHz
ƒ Peak-Current-Mode Control
ƒ Cycle-by-Cycle Current Limiting
ƒ Leading-Edge Blanking (LEB)
ƒ Internal Open-Loop Protection
ƒ GATE Output Maximum Voltage Clamp: 13V
ƒ VDD Under-Voltage Lockout (UVLO)
ƒ VDD Over-Voltage Protection (OVP)
ƒ Programmable Over-Temperature Protection (OTP)
ƒ Internal Latch Circuit (OVP, OTP)
ƒ Open-Loop Protection (OLP); Restart for MR, Latch
for ML
www.DataShƒeet4BUu.cioltm-in 8ms Soft-Start Function
ƒ Constant Power Limit (Full AC Input Range)
ƒ Internal OTP Sensor with Hysteresis
Applications
General-purpose switch-mode power supplies and
flyback power converters, including:
ƒ Power Adapters
Description
The highly integrated FAN6754 PWM controller
provides several features to enhance the performance
of flyback converters. To minimize standby power
consumption, a proprietary green-mode function
provides off-time modulation to continuously decrease
the switching frequency under light-load conditions.
Under zero-load and very light-load conditions,
FAN6754 saves PWM pulses by entering deep burst
mode. This burst mode function enables the power
supply to meet international power conservation
requirements.
FAN6754 integrates a frequency-hopping function
internally to reduce EMI emission of a power supply
with minimum line filters. Built-in synchronized slope
compensation is accomplished by, proprietary internal
compensation for constant output power limit over
universal AC input range. Also, the gate output is
clamped at 13V to protect the external MOSFET from
over-voltage damage.
Other protection functions include AC input brownout
protection with hysteresis and VDD over-voltage
protection. For over-temperature protection, an external
NTC thermistor can be applied to sense the external
switcher’s temperature. When VDD OVP or OTP are
activated, an internal latch circuit is used to latch-off the
controller. The latch mode is reset when the VDD supply
is removed.
FAN6754 is available in an 8-pin SOP package.
Ordering Information
Part Number
Operating
Temperature Range
FAN6754MRMY
FAN6754MLMY
-40 to +105°C
-40 to +105°C
Eco
Status
RoHS
RoHS
Package
8-Pin, Small Outline Package (SOP)
8-Pin, Small Outline Package (SOP)
Packing Method
Tape & Reel
Tape & Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2009 Fairchild Semiconductor Corporation
FAN6754 • Rev. 1.0.0
www.fairchildsemi.com

PagesPages 14
Télécharger [ FAN6754 ]


Fiche technique recommandé

No Description détaillée Fabricant
FAN6751 Highly Integrated Green-Mode PWM Controller Fairchild Semiconductor
Fairchild Semiconductor
FAN6753 Highly Integrated Green-Mode PWM Controller Fairchild Semiconductor
Fairchild Semiconductor
FAN6754 Highly Integrated Green-Mode PWM Controller Fairchild Semiconductor
Fairchild Semiconductor
FAN6754A Highly Integrated Green- Mode PWM Controller Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche