|
|
Número de pieza | S-5711A | |
Descripción | HALL IC | |
Fabricantes | Seiko Instruments | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de S-5711A (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
No Preview Available ! www.DaRtaeSvhe.e2t4.4U_.c0o0m
HALL IC
S-5711A Series
The S-5711A Series, developed by CMOS technology, is a Hall IC with a
high-sensitivity and operates on a low current.
The output voltage changes when the S-5711A Series detects the intensity
level of flux density. Using the S-5711A Series with a magnet makes it
possible to detect the open/close state in various devices.
High-density mounting is possible by using the super-small SNT-4A, SOT-
23-3 packages. Also, the S-5711A Series is the most suitable for portable
devices due to the low current consumption.
Features
• Built-in chopping stabilized amplifier
• Applicable in various devices with wide range of option
: Detection of both poles, south pole or north pole*1
: Active “L”, active “H” *1
: Nch open drain output, CMOS output
• Wide power supply voltage range : 2.4 V to 5.5 V
• Low current consumption :
5.0 µA typ., 8.0 µA max.
• Range of operation temperature: −40°C to +85°C
Small magnetic characteristics against temperature dependency
• Small package :
SNT-4A, SOT23-3
• Lead-free product
*1. Selectable by option
Please contact our sales office for options other than those specified in “ Product Name Structure”, “2. Product
name list”.
Applications
• Cellular phones (flip type, slide type, etc.)
• Laptop PCs
• Digital video cameras
• Playthings, portable games
• Home appliances
Packages
Package Name
SNT-4A
SOT-23-3
Package
PF004-A
MP003-C
Drawing Code
Tape
Reel
PF004-A
PF004-A
MP003-C
MP003-Z
Land
PF004-A
−
Seiko Instruments Inc.
1
1 page www.DataSheet4U.com
Rev.2.4_00
HALL IC
S-5711A Series
Absolute Maximum Ratings
Table 4
Item Symbol
Power supply voltage
Output voltage
Nch open drain output
CMOS output
VDD
VOUT
Power dissipation
SNT-4A
SOT-23-3
PD
Operating ambient temperature
Storage temperature
Topr
Tstg
*1. When mounted on board
[Mounted board]
(1) Board size:
114.3 mm × 76.2 mm × t1.6 mm
(2) Name:
JEDEC STANDARD51-7
(Ta = 25°C unless otherwise specified)
Absolute Maximum Rating
Unit
VSS−0.3 to VSS+7.0
VSS−0.3 to VSS+7.0
VSS−0.3 to VDD+0.3
300*1
430*1
V
V
V
mW
mW
−40 to +85
°C
−40 to +125
°C
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
600
SOT-23-3
400
SNT-4A
200
0
0 50 100 150
Ambient Temperature (Ta) [°C]
Figure 5 Power Dissipation of Package (When Mounted on Board)
Seiko Instruments Inc.
5
5 Page www.DataSheet4U.com
Rev.2.4_00
HALL IC
S-5711A Series
2. Basic operation
The S-5711A Series changes the output voltage level (VOUT) according to the level of the magnetic flux density (north
or south pole) applied by a magnet.
The following explains the operation when the magnetism detection logic is active “L”.
(1) Products with detection of both poles
When the magnetic flux density vertical to the marking surface exceeds BOPN or BOPS after the south or north pole
of a magnet is moved closer to the marking surface of the S-5711A Series, VOUT changes from “H” to “L”. When
the south or north pole of a magnet is moved further away from the marking surface of the S-5711A Series and
the magnetic flux density is lower than BRPN or BRPS, VOUT changes from “L” to “H”.
(2) Products with detection of south pole
When the magnetic flux density vertical to the marking surface exceeds BOPS after the south pole of a magnet is
moved closer to the marking surface of the S-5711A Series, VOUT changes from “H” to “L”. When the south pole
of a magnet is moved further away from the marking surface of the S-5711A Series and the magnetic flux density
is lower than BRPS, VOUT changes from “L” to “H”.
(3) Products with detection of north pole*1
When the magnetic flux density vertical to the marking surface exceeds BOPN after the north pole of a magnet is
moved closer to the marking surface of the S-5711A Series, VOUT changes from “H” to “L”. When the north pole
of a magnet is moved further away from the marking surface of the S-5711A Series and the magnetic flux density
is lower than BRPN, VOUT changes from “L” to “H”.
*1. Selectable by option
Seiko Instruments Inc.
11
11 Page |
Páginas | Total 26 Páginas | |
PDF Descargar | [ Datasheet S-5711A.PDF ] |
Número de pieza | Descripción | Fabricantes |
S-5711A | HALL IC | Seiko Instruments |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |