DataSheetWiki


LM20124 fiches techniques PDF

National Semiconductor - Synchronous Buck Regulator

Numéro de référence LM20124
Description Synchronous Buck Regulator
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM20124 fiche technique
www.DataSheet4U.com
January 16, 2008
LM20124
4A, 1MHz PowerWise® Synchronous Buck Regulator
General Description
The LM20124 is a full featured 1 MHz synchronous buck reg-
ulator capable of delivering up to 4A of continuous output
current. The current mode control loop can be compensated
to be stable with virtually any type of output capacitor. For
most cases, compensating the device only requires two ex-
ternal components, providing maximum flexibility and ease of
use. The device is optimized to work over the input voltage
range of 2.95V to 5.5V making it suited for a wide variety of
low voltage systems.
The device features internal over voltage protection (OVP)
and over current protection (OCP) circuits for increased sys-
tem reliability. A precision enable pin and integrated UVLO
allows the turn-on of the device to be tightly controlled and
sequenced. Start-up inrush currents are limited by both an
internally fixed and externally adjustable Soft-Start circuit.
Fault detection and supply sequencing is possible with the
integrated power good circuit.
The LM20124 is designed to work well in multi-rail power
supply architectures. The output voltage of the device can be
configured to track a higher voltage rail using the SS/TRK pin.
If the output of the LM20124 is pre-biased at startup it will not
sink current to pull the output low until the internal soft-start
ramp exceeds the voltage at the feedback pin.
The LM20124 is offered in a 16-pin eTSSOP package with an
exposed pad that can be soldered to the PCB, eliminating the
need for bulky heatsinks.
Features
Input voltage range 2.95V to 5.5V
Accurate current limit minimizes inductor size
96% efficiency at 1 MHz switching frequency
32 mintegrated FET switches
Starts up into pre-biased loads
Output voltage tracking
Peak current mode control
Adjustable output voltage down to 0.8V
Adjustable Soft-Start with external capacitor
Precision enable pin with hysteresis
Integrated OVP, UVLO, power good and thermal
shutdown
eTSSOP-16 exposed pad package
Applications
Simple to design, high efficiency point of load regulation
from a 5V or 3.3V bus
High Performance DSPs, FPGAs, ASICs and
microprocessors
Broadband, Networking and Optical Communications
Infrastructure
Typical Application Circuit
PowerWise® is a registered trademark of National Semiconductor Corporation.
© 2008 National Semiconductor Corporation 300142
30014201
www.national.com

PagesPages 20
Télécharger [ LM20124 ]


Fiche technique recommandé

No Description détaillée Fabricant
LM20123 LM20123/LM20123Q 3A 1.5MHz PowerWise Synchronous Buck Regulator (Rev. E) Texas Instruments
Texas Instruments
LM20123 Synchronous Buck Regulator National Semiconductor
National Semiconductor
LM20124 LM20124/LM20124Q 4A 1MHz PowerWise Synchronous Buck Regulator (Rev. F) Texas Instruments
Texas Instruments
LM20124 Synchronous Buck Regulator National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche