DataSheetWiki


MAX14527 fiches techniques PDF

Maxim Integrated Products - (MAX14527 / MAX14528) Adjustable Overvoltage Protector

Numéro de référence MAX14527
Description (MAX14527 / MAX14528) Adjustable Overvoltage Protector
Fabricant Maxim Integrated Products 
Logo Maxim Integrated Products 





1 Page

No Preview Available !





MAX14527 fiche technique
19-4357; Rev 0; 10/08
www.DataSheet4U.com
Adjustable Overvoltage Protector
with High Accuracy
General Description
The MAX14527/MAX14528 overvoltage protection
devices feature a low 100mΩ (typ) RON internal FET
and protect low-voltage systems against voltage faults
up to +28V. When the input voltage exceeds the over-
voltage threshold, the internal FET is turned off to pre-
vent damage to the protected components.
The overvoltage protection threshold can be adjusted
with optional external resistors to any voltage between
4V and 8V. With the OVLO input set below the external
OVLO select voltage, the MAX14527/MAX14528 auto-
matically choose the internal ±2.5% accurate trip
thresholds. The internal overvoltage thresholds (OVLO)
are preset to 5.75V typical (MAX14527) or 6.76V typical
(MAX14528). The MAX14527/MAX14528 are also
protected against overcurrent events with an internal
thermal shutdown.
The MAX14527/MAX14528 are offered in a small, 8-pin
TDFN-EP package and operate over the -40°C to
+85°C extended temperature range.
Features
Input Voltage Protection Up to +28V
Preset Internal ±2.5% Accurate OVLO Thresholds
5.75V (MAX14527)
6.76V (MAX14528)
Adjustable Overvoltage Protection Trip Level
Integrated 100mΩ (typ) n-Channel MOSFET
Switch
Soft-Start to Minimize In-Rush Current
Automatic Overvoltage Protection Trip-Level
Selection
Internal 15ms Startup Delay
Thermal Shutdown Protection
8-Pin TDFN (2mm x 2mm) Package
-40°C to +85°C Operating Temperature Range
Applications
Cell Phones
Media Players
PDAs and Palmtop Devices
Pin Configuration appears at end of data sheet.
Ordering Information
PART
PIN-PACKAGE
TOP
MARK
OVLO
(V)
MAX14527ETA+T 8 TDFN-EP*
MAX14528ETA+T 8 TDFN-EP*
ACR
ACS
5.75
6.76
Note: Devices are specified over the -40°C to +85°C tempera-
ture range.
+Denotes a lead-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.
Typical Application Circuit
VBUS
USB
CONNECTOR
1µF
R1
* R2
IN OUT
IN OUT
MAX14527
MAX14528
OVLO
GND
CHARGER
INPUT
PMIC
*R1 AND R2 ARE REQUIRED ONLY FOR ADJUSTABLE OVLO; OTHERWISE, CONNECT OVLO TO GND.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.

PagesPages 7
Télécharger [ MAX14527 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX1452 Low-Cost Precision Sensor Signal Conditioner Maxim Integrated
Maxim Integrated
MAX14521E High-Voltage EL Lamp Driver Maxim Integrated Products
Maxim Integrated Products
MAX14521EETG High-Voltage EL Lamp Driver Maxim Integrated
Maxim Integrated
MAX14523A Adjustable Current-Limit Switches Maxim Integrated Products
Maxim Integrated Products

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche