|
|
Número de pieza | HMC-ALH102 | |
Descripción | GaAs HEMT MMIC WIDEBAND LOW NOISE AMPLIFIER | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC-ALH102 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! www.DataSheet4U.com
v01.0108
1
Typical Applications
This HMC-ALH102 is ideal for:
• Wideband Communications Receivers
• Surveillance Systems
• Point-to-Point Radios
• Point-to-Multi-Point Radios
• Military & Space
• Test Instrumentation
Functional Diagram
HMC-ALH102
GaAs HEMT MMIC WIDEBAND
LOW NOISE AMPLIFIER, 2 - 20 GHz
Features
Noise Figure: 2.5 dB
Gain: 11.6 dB @ 10 GHz
P1dB Output Power: +10 dBm
Supply Voltage: +2V @ 55 mA
Die Size: 3.0 x 1.435 x 0.1 mm
General Description
The HMC-ALH102 is a GaAs MMIC HEMT Low Noise
Distributed Amplifier die which operates between
2 and 20 GHz. The amplifier provides 11.6 dB of gain
at 10 GHz, 2.5 dB noise figure and +10 dBm of out-
put power at 1 dB gain compression while requiring
only 55 mA from a +2V supply voltage. The HMC-
ALH102 amplifier is ideal for integration into Multi-
Chip-Modules (MCMs) due to its small size.
Electrical Specifications, TA = +25° C, Vdd= 2V [1], Idd = 55mA [2]
Parameter
Min.
Typ.
Frequency Range
2 - 20
Gain
8 10
Input Return Loss
15
Output Return Loss
12
Output Power for 1 dB Compression
8 10
Noise Figure
2.5
Supply Current (Idd)
55
[1] Unless otherwise indicated, all measurements are from probed die
[2] Adjust Vgg between -1V to +0.3V (Typ. -0.5V) to achieve Idd= 55 mA
Max.
Units
GHz
dB
dB
dB
dBm
dB
mA
1 - 114
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page www.DataSheet4U.com
1
Assembly Diagram
v01.0108
HMC-ALH102
GaAs HEMT MMIC WIDEBAND
LOW NOISE AMPLIFIER, 2 - 20 GHz
Note 1: Bypass caps should be 100 pF (approximately) ceramic (single-layer) placed no farther than 30 mils from the amplifier
Note 2: Best performance obtained from use of <10 mil (long) by 3 by 0.5 mil ribbons on input and output.10 Ohms
Note 3: Gate bond pads (VG) exist on the upper & lower sides of the MMIC for assembly convenience. For best performance the
unused pad should be attached to a 100pF cap to ground, but is not required.
1 - 118
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC-ALH102.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC-ALH102 | GaAs HEMT MMIC WIDEBAND LOW NOISE AMPLIFIER | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |