DataSheetWiki


VN5E160MS-E fiches techniques PDF

ST Microelectronics - High Side Switches

Numéro de référence VN5E160MS-E
Description High Side Switches
Fabricant ST Microelectronics 
Logo ST Microelectronics 





1 Page

No Preview Available !





VN5E160MS-E fiche technique
www.DataSheet4U.com
VN5E160MS-E
Single-channel high-side driver with analog
for automotive applications
Features
Max supply voltage
Operating voltage range
Max ON-state resistance
(per ch.)
VCC
41 V
VCC 4.5 V to 28 V
RON 160 mΩ
Current limitation (typ)
OFF-state supply current
ILIMH
IS
10 A
2 µA(1)
1. Typical value with all loads connected.
General
– Inrush current active management by
power limitation
– Very low standby current
– 3.0 V CMOS compatible inputs
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
– Very low current sense leakage
Diagnostic functions
– Proportional load current sense
– High-precision current sense for
wide currents range
– Current sense disable
– Overload and short to ground
(power limitation) indication
– Thermal shutdown indication
Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self-limiting of fast thermal transients
– Protection against loss of ground and loss
of VCC
– Overtemperature shutdown with
autorestart (thermal shutdown)
– Reverse battery protected (see Figure 29)
SO-8
– Electrostatic discharge protection
Applications
All types of resistive, inductive and capacitive
loads
Suitable as LED driver
Description
The VN5E160MS-E is a single-channel high-side
driver manufactured in the ST proprietary
VIPower M0-5 technology and housed in the tiny
SO-8 package. The VN5E160MS-E is designed to
drive 12 V automotive grounded loads delivering
protection, diagnostics and easy 3 V and 5 V
CMOS compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with
auto-restart and overvoltage active clamp.
A dedicated analog current sense pin is
associated with every output channel in order to
provide enhanced diagnostic functions including
fast detection of overload and short-circuit to
ground through power limitation indication and
overtemperature indication.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices.
June 2009
Doc ID 15730 Rev 1
1/35
www.st.com
1

PagesPages 30
Télécharger [ VN5E160MS-E ]


Fiche technique recommandé

No Description détaillée Fabricant
VN5E160MS-E High Side Switches ST Microelectronics
ST Microelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche