DataSheetWiki


AC2001 fiches techniques PDF

Dynex Semiconductor - 75-80ghz Millimetre Wave Gunn Diode Oscillator

Numéro de référence AC2001
Description 75-80ghz Millimetre Wave Gunn Diode Oscillator
Fabricant Dynex Semiconductor 
Logo Dynex Semiconductor 





1 Page

No Preview Available !





AC2001 fiche technique
www.DataSheet4U.com
Replaces March 1999, version DS5074-2.0
XXXXXX
AC2001
Millimeter Wave gunn Oscillator Module
DS5074-3.0 January 2000
Features
l High output power
l Low phase noise performance
l Frequency stability with temperature
l Frequency agility
Applications
l A low noise source for research use
l Autonomous Intelligent Cruise Control systems
l FMCW and Doppler radar systems
l Voltage controlled oscillator
Dynex Semiconductor has developed a low cost, state of
the art Millimetre Wave Gunn diode based oscillator
module that operates in the 75 to 80 GHz band, with a 1
GHz operational bandwidth.
The initial application of the oscillator is within an
automotive product.
The use of Gunn technology provides performance
advantages compared to competing technologies.
Figure 1 Millimeter Wave Gunn Oscillator Module
It is possible to extend the lower operational temperature
range of the oscillator by applying a small DC voltage to
the oscillator. This voltage is insufficient to generate any
RF power.
The Gunn diode is a custom MBE grown GaAs
hetrojunction device incorporated into a machined alloy
body with an integral custom waveguide 26 flange. The
oscillator is a radial mode 2nd harmonic bias tuned
design.
For microstrip applications a waveguide to 0.18mm
microstrip step transition is available to interface the
oscillator to microstrip circuits.
A separate power supply driver PCB can be provided to
interface to the Gunn module. This provides over voltage,
spike and reverse polarity protection. The driver PCB
also allows ease of frequency setting or the application of
modulation.
It should be noted that the Gunn diode is easily damaged
by voltage transients or reverse bias. It is recommended
that the driver circuitry is always used to protect the Gunn
diode from potential damage.
The required frequency range must be specified when
ordering the parts.
Specification
Potential operating frequency range
Microwave Output power (@25C)
SSB Phase Noise (100kHz offset)
Operating voltage range
Supply current
DP/DT (max.)
DF/DT (typ.)
Voltage pushing
Operational temperature range
Weight (Oscillator only)
75 - 80 GHz
+16 dBm min.
-85 dBc/Hz typ.
5.0 - 6.5 V
750 mA typ.
0.35 mW/C
1 - 2 MHz/C
400 - 800 MHz/V
-30 C to +85 C
25 g approx.
Frequency adjustment or modulation of the oscillator is
achieved by changing the oscillator bias supply via the
driver PCB. The driver PCB provides a control voltage
input for this purpose. The voltage limits must be within
those specified
1

PagesPages 2
Télécharger [ AC2001 ]


Fiche technique recommandé

No Description détaillée Fabricant
AC200 200 Watt Single Output U Frame AC-DC Modules Initio
Initio
AC200-xxx 200 Watt Single Output U Frame AC-DC Modules Initio
Initio
AC2001 75-80ghz Millimetre Wave Gunn Diode Oscillator Dynex Semiconductor
Dynex Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche