DataSheet.es    


PDF HMC666LP4 Data sheet ( Hoja de datos )

Número de pieza HMC666LP4
Descripción SMT BiCMOS Mixer W/ Integrated LO Amplifier
Fabricantes Hittite Microwave Corporation 
Logotipo Hittite Microwave Corporation Logotipo



Hay una vista previa y un enlace de descarga de HMC666LP4 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! HMC666LP4 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
HMC666LP4 / 666LP4E
v01.0608
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Typical Applications
The HMC666LP4(E) is Ideal for:
• WiMAX/4G & Fixed Wireless
• Infrastructure & Repeaters
• Transmitters & Receivers
9 • Test & Measurement Equipment
Functional Diagram
Features
High Input IP3: +31 dBm
Low Conversion Loss: 9 dB
Low LO Drive: 0 dBm
Upconversion & Downconversion Applications
Optimized for low side LO input
24 Lead 4x4mm SMT Package: 16mm2
General Description
The HMC666LP4(E) is a high dynamic range
passive MMIC mixer with integrated LO ampli-
fier in a 4x4 SMT QFN package covering 3.1 - 3.9
GHz. Excellent input IP3 performance of +31
dBm for down conversion is provided for WiMAX
and fixed wireless applications at an LO drive of
0 dBm. The LO port is optimized for low side LO appli-
cations. With an input 1 dB compression of +23 dBm,
the RF port will accept a wide range of input signal
levels. Conversion loss is 9 dB typical. The DC to 800
MHz IF frequency response will satisfy WiMAX trans-
mit or receive frequency plans. The HMC666LP4(E) is
pin for pin compatible with the HMC688LP4(E) which
is a 2.0 - 2.7 GHz mixer with LO amplifier.
Electrical Specifications,
TA = +25° C, IF= 300 MHz, LO= 0 dBm, Vcc=Vcc1, 2, 3 = +5V, G_Bias= +2.5V
Parameter
Min.
Typ. Max.
Frequency Range, RF
3.1 - 3.9
Frequency Range, LO
2.8 - 3.6
Frequency Range, IF
DC - 800
Conversion Loss
9 12
Noise Figure (SSB)
9
LO to RF Isolation
21 27
LO to IF Isolation
22 29
RF to IF Isolation
34 42
IP3 (Input)
31
1 dB Compression (Input)
23
LO Drive Input Level (Typical)
-3 to +3
Supply Current Icc total
162 195
* Unless otherwise noted all measurements performed as downconverter with low side LO & IF = 300 MHz.
Units
GHz
GHz
MHz
dB
dB
dB
dB
dB
dBm
dBm
dBm
mA
9 - 400
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

1 page




HMC666LP4 pdf
www.DataSheet4U.com
Outline Drawing
v01.0608
HMC666LP4 / 666LP4E
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
9
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC666LP4
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC666LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 [1]
MSL1 [2]
Package Marking [3]
H666
XXXX
H666
XXXX
9 - 404
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet HMC666LP4.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC666LP4SMT BiCMOS Mixer W/ Integrated LO AmplifierHittite Microwave Corporation
Hittite Microwave Corporation
HMC666LP4ESMT BiCMOS Mixer W/ Integrated LO AmplifierHittite Microwave Corporation
Hittite Microwave Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar