DataSheetWiki


VN5E160S-E fiches techniques PDF

STMicroelectronics - Single channel high side driver

Numéro de référence VN5E160S-E
Description Single channel high side driver
Fabricant STMicroelectronics 
Logo STMicroelectronics 





1 Page

No Preview Available !





VN5E160S-E fiche technique
www.DataSheet4U.com
VN5E160S-E
Single channel high side driver for automotive applications
Features
Max transient supply voltage
Operating voltage range
Max On-state resistance (per ch.)
VCC 41V
VCC 4.5 to 28V
RON 160 m
Current limitation (typ)
Off state supply current
ILIMH
IS
10A
2 µA(1)
1. Typical value with all loads connected.
General
– Inrush current active management by
power limitation
– Very low stand-by current
– 3.0V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
Diagnostic functions
– Open Drain status output
– On-state open load detection
– Off-state open load detection
– Output short to VCC detection
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of VCC
– Over-temperature shutdown with
autorestart (thermal shutdown)
– Reverse battery protected (a)
– Electrostatic discharge protection
SO-8
Application
All types of resistive, inductive and capacitive
loads
Description
The VN5E160S-E is a single channel high-side
driver manufactured in the ST proprietary
VIPower M0-5 technology and housed in the tiny
SO-8 package.
The VN5E160S-E is designed to drive automotive
grounded loads delivering protection, diagnostics
and easy 3V and 5V CMOS-compatible interface
with any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, over-temperature shut-off with auto-
restart and over-voltage active clamp.
A dedicated active low digital status pin is
associated with every output channel in order to
provide Enhanced diagnostic functions including
fast detection of overload and short-circuit to
ground, over-temperature indication, short-circuit
to VCC diagnosis and ON & OFF state open-load
detection.
The diagnostic feedback of the whole device can
be disabled by pulling the STAT_DIS pin up, thus
allowing wired-ORing with other similar devices.
a. See Figure 32: Application schematic.
February 2008
Rev 2
1/34
www.st.com
34

PagesPages 30
Télécharger [ VN5E160S-E ]


Fiche technique recommandé

No Description détaillée Fabricant
VN5E160S-E Single channel high side driver STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche