DataSheetWiki


PDG-02A fiches techniques PDF

Merrimac Industries - 0 POWER DIVIDERS / COMBINERS

Numéro de référence PDG-02A
Description 0 POWER DIVIDERS / COMBINERS
Fabricant Merrimac Industries 
Logo Merrimac Industries 





1 Page

No Preview Available !





PDG-02A fiche technique
PDG-02A Series
0 POWER DIVIDERS / COMBINERS
10 to 1000 MHz / 2-Way / Broadband / Minimal Size and Weight / Low 0.2" Profile / Surface Mount
www.datasheet4u.com
Model
Number
PDG-02A-250
PDG-02A-500
Frequency
Range,
MHz
10 - 500
50 - 1000
PRINCIPAL SPECIFICATIONS
Isolation,
dB,
Min. Typ.
Insertion
Loss, dB,
Max. Typ.
Amplitude
Balance, dB,
Max. Typ.
20 25 1.0 0.5 0.2 0.1
18 25 1.5 1.0 0.3 0.2
Phase
Balance,
Max. Typ.
2° 1°
4° 2°
VSWR
Max. Typ.
1.5:1 1.3:1
1.5:1 1.3:1
General Notes:
1. The basic power divider is a hybrid junction with one of its ports internally
terminated. For in-phase power division, such as provided in the PDG-02A series,
the E port is internally terminated.
2. Careful design and construction insure phase and amplitude uniformity between
units. Additionally, these units provide excellent transfer phase linearity and
amplitude flatness. These characteristics are of critical importance to the success-
ful design of modern multi-channel receivers, transmitters and antenna systems.
3. Merrimac Power Dividers/Combiners are available in a variety of packages to
suit most requirements. The surface mounted versions in the PDG-02A series use
lumped element design. This approach is particularly appropriate for those appli-
cations where small size is important.
GENERAL SPECIFICATIONS
Impedance:
50 nom.
Coupling (Theoretical): -- 3.0 dB
CW Input Power:
250 mW max.
(When used as divider with 1.2:1 VSWRout)
Internal Load Dissipation: 28 mW max.
Weight, nominal:
0.02 oz. (0.5 g)
Operating Temperature: -- 55° to + 85°C
Surface Mount A-Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. All unmarked tabs are ground.
26Apr96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531

PagesPages 1
Télécharger [ PDG-02A ]


Fiche technique recommandé

No Description détaillée Fabricant
PDG-02A 0 POWER DIVIDERS / COMBINERS Merrimac Industries
Merrimac Industries
PDG-02B 0 POWER DIVIDERS / COMBINERS Merrimac Industries
Merrimac Industries

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche