DataSheetWiki


HMC708LP5E fiches techniques PDF

Hittite Microwave Corporation - 6-Bit Digital Variable Gain Amplifier

Numéro de référence HMC708LP5E
Description 6-Bit Digital Variable Gain Amplifier
Fabricant Hittite Microwave Corporation 
Logo Hittite Microwave Corporation 





1 Page

No Preview Available !





HMC708LP5E fiche technique
HMC708LP5 / 708LP5E
v02.0209
0.5 dB LSB 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, 1700 - 2200 MHz
www.datashTeeytp4ui.ccoaml Applications
The HMC708LP5(E) is ideal for:
• Cellular Infrastructure
• WiBro, WiMAX and LTE/ 4G
• Microwave Radio & VSAT
• Test Equipment and Sensors
13
Functional Diagram
Features
-2.5 to +29 dB Gain Control in 0.5 dB Steps
Power-up State Selection
High Output IP3: +37 dBm
Low Noise Figure: 1 dB
TTL/CMOS Compatible
Serial, Parallel, or Latched Parallel Control
±0.25 dB Typical Step Error
Single +3V and +5V Supply
32 Lead 5x5mm SMT Package: 25mm2
General Description
The HMC708LP5(E) is a digitally controlled variable
gain amplifier which operates from 1700 MHz and
2200 GHz, and can be programmed to provide
between 2.5 dB attenuation and +29 dB of gain, in
0.5 dB steps. The HMC708LP5(E) delivers noise
figure of 1 dB in its maximum gain state, with output
IP3 of up to +37 dBm. The dual mode gain control
interface accepts either three wire serial input or
6 bit parallel word. The HMC708LP5(E) also features
a user selectable power up state and a serial
output for cascading other Hittite serially controlled
components. For 900 MHz applications please refer
to the HMC707LP5(E) data sheet.
13 - 96
Electrical Specifications, TA = +25° C
Rbias = 270 Ohms for Vdd = +5V, Rbias = 10k Ohms for Vdd = +3V, Vdd = Vdd1 = Vdd2 = Vdd3
Parameter
Min.
Typ.
Vdd = +3V
Max.
Frequency Range
1.7 - 2.2
Gain (Maximum Gain State)
23 27
Gain Control Range
31.5
Input Return Loss
16.5
Output Return Loss
10.5
Attenuation Accuracy: (Referenced to Maximum Gain State) ±(0.3 + 8%) of Attenuation Setting
Output Power for 1 dB Compression
13 16
Output Third Order Intercept Point
(Two-Tone Input Power= -10 dBm Each Tone)
32.5
Noise Figure
1.1
Switching Characteristics
tRISE, tFALL (50% CTL to 90% RF)
tRISE
tFALL
-
-
Current Amplifier 1
30 47 65
Current Amplifier 2
130 155 190
[1] Two-tone output power @ -10 dBm [2] Two-tone output power @ -5 dBm
Min. Typ. Max.
Vdd = +5V
1.7 - 2.2
25 30
31.5
20.5
13.5
±(0.2 + 5%) of Attenuation Setting
18 21.5
37.5
1
140
270
80 97 135
130 155 190
Units
GHz
dB
dB
dB
dB
dB
dBm
dBm
dB
ns
ns
mA
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

PagesPages 12
Télécharger [ HMC708LP5E ]


Fiche technique recommandé

No Description détaillée Fabricant
HMC708LP5 6-Bit Digital Variable Gain Amplifier Hittite Microwave Corporation
Hittite Microwave Corporation
HMC708LP5E 6-Bit Digital Variable Gain Amplifier Hittite Microwave Corporation
Hittite Microwave Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche