|
|
Número de pieza | HMC746LC3C | |
Descripción | 13 Gbps Fast Rise Time AND/NAND / OR/NOR Gate W/Programmable Output Voltage | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC746LC3C (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! HMC746LC3C
v02.0109
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
www.datashTeeytp4ui.ccoaml Applications
The HMC746LC3C is ideal for:
• RF ATE Applications
7 • Broadband Test & Measurement
• Serial Data Transmission up to 13 Gbps
• Digital Logic Systems up to 13 GHz
• NRZ-to-RZ Conversion
Functional Diagram
Features
Supports High Data Rates: up to 13 Gbps
Differential & Singe-Ended Operation
Fast Rise and Fall Times: 22 / 21 ps
Low Power Consumption: 230 mW typ.
Programmable Differential
Output Voltage Swing: 600 - 1100 mV
Propagation Delay: 95 ps
Single Supply: +3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
General Description
The HMC746LC3C is an AND/NAND/OR/NOR fun-
ction designed to support data transmission rates
of up to 13 Gbps, and clock frequencies as high
as 13 GHz. The HMC746LC3C may be easily con-
figured to provide any of the following logic functions:
AND, NAND, OR and NOR. The HMC746LC3C also
features an output level control pin, VR, which allows
for loss compensation or for signal level optimization.
All input and output signals to the HMC746LC3C are
terminated with 50 Ohms to Vcc on-chip, and may
be either AC or DC coupled. Inputs and outputs can
be connected directly to a 50 Ohm to Vcc terminated
system, while DC blocking capacitors may be used
if the terminating system is 50 Ohms to ground. The
HMC746LC3C operates from a single +3.3V DC supply,
and is available in a ceramic RoHS compliant 3x3 mm
SMT package.
7 - 154
Electrical Specifications, TA = +25°C, Vcc = +3.3V
Parameter
Conditions
Power Supply Voltage
Power Supply Current
Maximum Data Rate
Maximum Clock Rate
Input High Voltage
Input Low Voltage
Input Return Loss
Frequency <13 GHz
Output Amplitude
Single-Ended, peak-to-peak
Differential, peak-to-peak
Output High Voltage
Min.
3.0
2.8
2.1
Typ.
3.3
70
13
13
10
550
1100
3.25
Max
3.6
3.8
3.3
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Units
V
mA
Gbps
GHz
V
V
dB
mVpp
mVpp
V
1 page HMC746LC3C
v02.0109
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
www.datashAeebt4su.ocolmute Maximum Ratings
7
Power Supply Voltage (Vcc)
Input Signals
Output Signals
Storage Temperature
Operating Temperature
-0.5V to +3.7V
Vcc - 2V to Vcc + 0.5V
+1V to +3.7V
-65°C to +150°C
-40°C to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
7 - 158
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO GND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet HMC746LC3C.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC746LC3C | 13 Gbps Fast Rise Time AND/NAND / OR/NOR Gate W/Programmable Output Voltage | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |