PDF HMC705LP4E Data sheet ( Hoja de datos )

Número de pieza	HMC705LP4E
Descripción	6.5 GHz Programmable Divider SMT
Fabricantes	Hittite Microwave Corporation
Logotipo
Hay una vista previa y un enlace de descarga de HMC705LP4E (archivo pdf) en la parte inferior de esta página. Total 12 Páginas
No Preview Available ! HMC705LP4 / HMC705LP4E v04.0212 6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17) Typical Applications The HMC705LP4(E) is ideal for: • Satellite Communication Systems • Point-to-Point Radios • Military Applications • Sonet Clock Generation • Test Equipment Functional Diagram Features Ultra Low SSB Phase Noise Floor: -153 dBc/Hz @ 100 kHz Programmable Divider (N= 1 - 17) Operating up to 6.5 GHz 24 Lead 4X4mm SMT Package: 16mm2 General Description The HMC705LP4(E) is a low noise GaAs HBT programmable divider in a 4x4 mm leadless surface mount package. The divider can be programmed to divide by any number from N = 1 to N = 17 up to 6.5 GHz. The HMC705LP4E’s high frequency operation along with low phase noise floor is very useful in high performance fast settling synthesizer architectures. The HMC705LP4E may be combined with Hittite’s Phase Frequency Detectors, VCOs and PLL ICs to create low noise, fast settling phase locked loops. Electrical Specifications, TA = +25° C, Vcc = Vcc1 = Vcc2 = +5V Parameter Conditions Maximum Input Frequency Sine Wave or Square Wave Input Minimum Input Frequency Sine Wave or Square Wave Input Input Power Range Fin = 0.1 to 6.5 GHz* Output Power Divide-by-2 SSB Phase Noise Fin = 6 GHz, N = 17 Total Supply Current * For sine wave inputs less than 400 MHz input power must be greater than or equal to -5 dBm Min. 6.5 -15 Typ. 0 0 -153 190 Max. 0.1 10 Units GHz GHz dBm dBm dBc/Hz mA For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 1 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 1 page HMC705LP4 / HMC705LP4E v04.0212 6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17) Output Voltage Waveform, Fin = 500 MHz, N = 2, Pin = 0 dBm, T= 25 °C 300 200 100 0 -100 -200 -300 25 26 27 28 29 30 31 TIME (ns) Output Voltage Waveform, Fin = 2500 MHz, N = 10, Pin = 0 dBm, T= 25 °C 200 100 0 -100 -200 -300 -400 -500 32 33 34 35 36 37 38 TIME (ns) Output Voltage Waveform, Fin = 750 MHz, N = 3, Pin = 0 dBm, T= 25 °C 400 300 200 100 0 -100 -200 26 27 28 29 30 31 32 33 TIME (ns) Output Voltage Waveform, Fin = 4250 MHz, N = 17, Pin = 0 dBm, T= 25 °C 100 0 -100 -200 -300 -400 -500 25 26 27 28 29 30 TIME (ns) N 1 2 3 - 17 Output Duty Cycle (%) Input 50 [ 1 - (2/N) ] x 100 Note: [1] Peak to peak amplitude does not change relative to N. [2] Pulse duty cycle changes relative to N. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 5 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 5 Page HMC705LP4 / HMC705LP4E v04.0212 6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 11 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 11 Page

Páginas	Total 12 Páginas
PDF Descargar	[ Datasheet HMC705LP4E.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
HMC705LP4	6.5 GHz Programmable Divider SMT	Hittite Microwave Corporation
HMC705LP4E	6.5 GHz Programmable Divider SMT	Hittite Microwave Corporation

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar