DataSheetWiki


NX3L1T3157 fiches techniques PDF

NXP Semiconductors - Low-ohmic single-pole double-throw switch

Numéro de référence NX3L1T3157
Description Low-ohmic single-pole double-throw switch
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





NX3L1T3157 fiche technique
NX3L1T3157
Low-ohmic single-pole double-throw switch
Rev. 05 — 28 July 2008
Product data sheet
www.datasheet4u.com
1. General description
The NX3L1T3157 provides one low-ohmic single-pole double-throw analog switch,
suitable for use as an analog or digital multiplexer/demultiplexer. It has a digital select
input (S) with Schmitt trigger action, two independent inputs/outputs (Y0, Y1) and a
common input/output (Z).
Schmitt trigger action at the select input (S) makes the circuit tolerant to slower input rise
and fall times across the entire VCC range from 1.4 V to 3.6 V.
A low input voltage threshold allows pin S to be driven by lower level logic signals without
a significant increase in supply current ICC. This makes it possible for the NX3L1T3157 to
switch 3.6 V signals with a 1.8 V digital controller, eliminating the need for logic level
translation.
The NX3L1T3157 allows signals with amplitude up to VCC to be transmitted from Z to Y0
or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures
minimal attenuation and distortion of transmitted signals.
2. Features
I Wide supply voltage range from 1.4 V to 3.6 V
I Very low ON resistance (peak):
N 1.6 (typical) at VCC = 1.4 V
N 1.0 (typical) at VCC = 1.65 V
N 0.55 (typical) at VCC = 2.3 V
N 0.50 (typical) at VCC = 2.7 V
I Break-before-make switching
I High noise immunity
I ESD protection:
N HBM JESD22-A114E Class 3A exceeds 7500 V
N MM JESD22-A115-A exceeds 200 V
N CDM AEC-Q100-011 revision B exceeds 1000 V
I CMOS low-power consumption
I Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
I Direct interface with TTL levels at 3.0 V
I Control input accepts voltages above supply voltage
I Very low supply current, even when input is below VCC
I High current handling capability (350 mA continuous current under 3.3 V supply)
I Specified from 40 °C to +85 °C and from 40 °C to +125 °C

PagesPages 20
Télécharger [ NX3L1T3157 ]


Fiche technique recommandé

No Description détaillée Fabricant
NX3L1T3157 Low-ohmic single-pole double-throw switch NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche