|
|
PDF GA1A1S201WP Data sheet ( Hoja de datos )
| Número de pieza | GA1A1S201WP | |
| Descripción | Surface Mount Package OPIC Logarithmic Output Ambient Light Sensor | |
| Fabricantes | Sharp | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GA1A1S201WP (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
GA1A1S201WP
GA1A1S201WP
Surface-mount Package OPIC™
Logarithmic Output Ambient Light Sensor
www.datasheet4u.com
■ Description
The GA1A1S201WP is an surface-mount ambient
light sensor with a spectral response similar to that of
the human eye. This response curve means the sensor
is highly accurate when used as the basis of an ambi-
ent light sensor, or camera exposure sensor.
The integrated photodiode and amplifier circuit
makes the GA1A1S201WP ideal for use in space-con-
strained applications, or for anywhere a sensor may be
wanted but wasted space is not.
■ Features
1. Logarithmic output, suitable for both indoor and
outdoor illumination
2. Light sensitivity similar to the human eye’s re-
sponse curve
3. OPIC light detector: Integrated photodiode and
amplifier circuit
4. Compact package (1.6 mm × 2.0 mm)
5. Stable over specified temperature range
6. Lead-free and RoHS-directive compliant
■ Agency Approvals
1. Compliant with RoHS directive (2002/95/EC)
2. Content information about the six substances
specified in “Management Methods for Control of
Pollution Caused by Electronic Information Prod-
ucts Regulation” (popular name: China RoHS)
(Chinese:
);
refer to page 5.
■ Applications
1. Mobile Phones
2. TV/Monitors
3. Cameras
OPIC is a trademark of Sharp Corporation.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1 Sheet No.: D1-A00401 EN
Date: October 1, 2007
©SHARP Corporation
1 page  
Fig. 1 Soldering Temperature Profile
250°C
MAX.
w w w220°.C d a t a
180°C
MAX. 1 ~ 4°C/s
sheet4u.c
1 ~ 4°C/s
om
1 ~ 4°C/s
GA1A1S201WP
25°C
120 s MAX.
10 s MAX.
60 s MAX.
90 s MAX.
● Cleaning Instructions
1. Confirm this device's resistance to process chemicals before use, as certain process chemicals may affect the
optical characteristics.
2. Solvent cleaning: Solvent temperature should be 45°C or below. Immersion time should be 3 minutes or less.
3. Ultrasonic cleaning: The effect upon devices varies due to cleaning bath size, ultrasonic power output, cleaning
time, PCB size and device mounting circumstances. Sharp recommends testing using actual production condi-
tions to confirm the harmlessness of the ultrasonic cleaning methods.
4. Recommended solvent materials: Ethyl alcohol, Methyl alcohol, and Isopropyl alcohol.
■ Presence of ODCs (RoHS Compliance)
This product shall not contain the following materials, and they are not used in the production process for this
product:
• Regulated substances: CFCs, Halon, Carbon tetrachloride, 1,1,1-Trichloroethane (Methylchloroform). Specific
brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
• Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl
ethers (PBDE).
• Content information about the six substances specified in “Management Methods for Control of Pollution
Caused by Electronic Information Products Regulation” (Chinese:
)
Toxic and Hazdardous Substances
Category
OPIC Light Sensors
Lead (Pb)
mercury (Hg)
Cadmium (Cd)
Hexavalent
chromiun (Cr6+)
✓✓
✓
✓
Polybrominated
biphenyls (PBB)
✓
Polybrominated
diphenyl ethers
(PBDE)
✓
NOTE: ✓ indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement
as described in SJ/T 11363-2006 standard.
Sheet No.: D1-A00401 EN
5
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet GA1A1S201WP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GA1A1S201WP | Surface Mount Package OPIC Logarithmic Output Ambient Light Sensor | Sharp |
| GA1A1S201WP | OPIC Light Detector | Sharp |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |