DataSheetWiki


A6252M fiches techniques PDF

Sanken Electric - STR-A6252M

Numéro de référence A6252M
Description STR-A6252M
Fabricant Sanken Electric 
Logo Sanken Electric 





1 Page

No Preview Available !





A6252M fiche technique
Sanken Power Devices
from Allegro MicroSystems
www.datasheet4u.com
STR-A6252M
Universal-Input 20 W 67 kHz
Flyback Switching Regulators
Approximate Scale 1:1
Package DIP-8
FEATURES AND BENEFITS
67 kHz PWM with ±5% frequency jittering for EMI noise
filtering and cost reduction
Rugged 650 V avalanche-rated MOSFET:
• Simplified surge absorption
• No VDSS derating required
Low RDS(on) : 2.8 Ω maximum
Auto-burst mode for stand-by operation or light loads; less
transformer audible noise
Built-in leading edge blanking
Soft start and low start-up current; start-up circuit disabled in
operation
Auto-burst stand-by (intermittent operation) input power
<0.1 W at no load
Built-in constant-voltage/constant current (CV/CC)
Multiple protections:
• Pulse-by-pulse overcurrent protection (OCP)
• Overload protection (OLP) with auto restart
• Latching overvoltage protection (OVP)
• Undervoltage lockout (UVLO) with hysteresis
• Latching thermal shutdown (TSD)
The STR-A6252M is a 67 kHz PWM topology (with ±5%
frequency jittering for minimum EMI) regulator specifically
designed to satisfy the requirements for increased integration and
reliability in flyback converters. It incorporates a primary control
and drive circuit with an avalanche-rated power MOSFET. This
is a higher-frequency version of the STR-A6252.
Covering the power range from below 24 watts for a
230 VAC input, or to 20 watts for a universal (85 to 264 VAC)
input, this device can be used in a wide range of applications,
from DVD players and VCR player/recorders to ac adapters
for cellular phones and digital cameras. An auto-burst standby
function reduces power consumption at light load, while multiple
protections, including the avalanche-energy guaranteed MOSFET,
provide high reliability of system design.
Cycle-by-cycle current limiting, undervoltage lockout with
hysteresis, overvoltage protection, and thermal shutdown protect
the power supply during the normal overload and fault conditions.
Overvoltage protection and thermal shutdown are latched after a
short delay. The latch may be reset by cycling the input supply.
Low start-up current and a low-power standby mode selected
from the secondary circuit completes a comprehensive suite of
features.
It is provided in an 8-pin mini-DIP plastic package with pin
6 removed. The leadframe plating is pure Sb, and the package
complies with RoHS.
All performance characteristics given are typical values for circuit or
system baseline design only and are at the nominal operating voltage and Always order by complete part number, e.g.: STR-A6252M
an ambient temperature of +25°C, unless otherwise stated.
Datasheet 28103.44-5a

PagesPages 13
Télécharger [ A6252M ]


Fiche technique recommandé

No Description détaillée Fabricant
A6252 STR-A6252 Allegro MicroSystems
Allegro MicroSystems
A6252M STR-A6252M Sanken Electric
Sanken Electric

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche