|
|
Número de pieza | TCLAMP0602N | |
Descripción | Low Capacitance TVS | |
Fabricantes | Semtech Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TCLAMP0602N (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! www.datasheet4u.com
TClamp0602N
Low Capacitance TVS
for Ethernet and Telecom Interfaces
PROTECTION PRODUCTS - TransClampΤΜ
Description
A TransClampΤΜ is a low capacitance TVS array de-
signed to protect high speed data interfaces. This
series has been specifically designed to protect sensi-
tive components which are connected to data and
transmission lines from overvoltage caused by ESD
(electrostatic discharge), CDE (Cable Discharge
Events), and Lightning.
These devices integrate low capacitance, surge-rated
compensation diodes with a high power transient
voltage suppressor (TVS). The compensation diodes
are arranged in a bridge pattern allowing the device to
be connected in common mode and/or differential
mode. This allows the designer maximum flexibility and
reduces parts count. The capacitance of the device is
limited to 12pF maximum from line-to-line to ensure
correct signal transmission on high-speed lines.
These devices may be used to meet Bellcore GR-1089-
CORE short-haul (intra-building) surge requirements and
will withstand a minimum 100 A surge for a 2/10μs
pulse.
The TClampTM0602N is in a 10-pin, RoHS/WEEE
compliant, SLP2626P10 package. It measures 2.6 x
2.6 x 0.60mm. The leads are spaced at a pitch of
0.5mm and are finished with lead-free NiPdAu. They
are particularly well suited for applications where board
space is at a premium such as integrated connectors/
magnetics and T1/E1 equipment.
Features
Transient protection for high-speed data lines to
Bellcore 1089 (Intra-Building) 100A (2/10μs)
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) L5, 95A (8/20μs)
Protects two lines in common and differential mode
Low capacitance (12pF line-to-line)
Low operating voltages (6V)
Low clamping voltage
Small SLP Package saves board space
Solid-state technology
Mechanical Characteristics
SLP2626P10 10L package
RoHS/WEEE Compliant
Nominal Dimensions: 2.6 x 2.6 x 0.60 mm
Lead Pitch: 0.5mm
Molding compound flammability rating: UL 94V-0
Marking: Marking Code
Packaging: Tape and Reel
Applications
T1/E1
T3/E3
10/100 Ethernet
Integrated Magnetics
Carrier Class Equipment
ISDN Interfaces
Circuit Diagram
Package Configuration
LINE 1
(1, 2, 3)
Center Tab
2.60
1 2 CL
CL 2.60
0.50 BSC
LINE 2
(8, 9, 10)
Revision 5/23/2007
0.60
10 Pin SLP package (Bottom Side View)
Nominal Dimensions in mm
1 www.semtech.com
1 page www.datasheet4u.com
PROTECTION PRODUCTS
Applications Information - Spice Model
TClamp0602N
D3
D1
D2
D3 D2
TClamp0602N Spice Model
Parameter
IS
BV
VJ
RS
IBV
CJO
TT
M
N
EG
TClamp0602N Spice Parameters
Unit D1 (TVS) D2 (LCRD)
Amp
1.4E-11
1.001E-20
Volt 8.3
150
Volt 0.56
0.59
Ohm 0.029
0.075
Amp 1E-3
1E-3
Farad
300e-12
11.0E-12
sec
2.541E-9
2.541E-9
--
0.256
0.01
-- 1.1 1.1
eV 1.11 1.11
D3 (LCRD)
1.001E-20
150
0.59
0.064
1E-3
11.0E-12
2.541E-9
0.01
1.1
1.11
© 2007 Semtech Corp.
5
www.semtech.com
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet TCLAMP0602N.PDF ] |
Número de pieza | Descripción | Fabricantes |
TCLAMP0602N | Low Capacitance TVS | Semtech Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |