|
|
Número de pieza | 3C16475CS | |
Descripción | Baseline Switch 2226 Plus User Guide | |
Fabricantes | 3Com | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 3C16475CS (archivo pdf) en la parte inferior de esta página. Total 70 Páginas | ||
No Preview Available ! Baseline Switch
2226 Plus
User Guide
Installationsanleitung
3C16475CS
www.3com.com
Part No. 10015240 Rev. AA
Published August 2006
1 page GLOSSARY
REGULATORY NOTICES
INDEX
5 Page can be connected to either a 10BASE-T, or 100BASE-TX
device.
For each port, the speed and duplex mode (half duplex
or full duplex for 10BASE-T and 100BASE-TX) are
automatically determined by the capabilities of the
connected device.
CAUTION: The Switch supports full duplex
auto-negotiation. If auto-negotiation is disabled for
1000BASE-T, then the Switch uses the forced-mode
default of 100 full duplex mode. If the connected device
does not support auto-negotiation, the Switch will
operate in half duplex mode (even if the attached device
is operating in full duplex mode). In such a
configuration, you may notice some degradation of
network performance. 3Com recommends that you use
devices that are capable of auto-negotiation (and that
you ensure that auto-negotiation is enabled, if it is a
configurable option).
(2) Gigabit Combo Ports (RJ-45/SFP)
The Gigabit combo ports (RJ-45/Small Form Factor
Pluggable (SFP) ports) are numbered 25 and 26. If the
link connections on the SFP ports are active, the
associated RJ-45 port of the same number is disabled.
The two SFP ports support fiber Gigabit Ethernet
short-wave (SX) and long-wave (LX) SFP transceivers in
any combination. This offers you the flexibility of using
SFP transceivers to provide connectivity between the
Switch and remote 1000 Mbps workgroups or to create
Physical Features
11
a high-capacity aggregated link backbone connection.
The default active port is the SFP port. The selection of
active ports can be configured via the Web interface.
The SFP port supports full duplex mode only.
SFP ports are numbered 25 and 26 on the Switch.
When an SFP port is active it has priority over the
10/100/1000 port of the same number. The
corresponding 10/100/1000 port is disabled when an
SFP link connection is active.
(3) Link/Activity Status LEDs
The first (top) and third row of LEDs, which are colored
yellow or green, show the link, activity and speed status
of the related ports:
10/100/1000BASE-T Ports
Status Meaning
Green The link is operating at 1000 Mbps.
Yellow The link is operating at 10 or 100 Mbps.
Flashing Packets are being received or transmitted on the
Green port at 1000 Mbps.
Flashing Packets are being received or transmitted on the
Yellow port at 10 or 100 Mbps.
11 Page |
Páginas | Total 70 Páginas | |
PDF Descargar | [ Datasheet 3C16475CS.PDF ] |
Número de pieza | Descripción | Fabricantes |
3C16475CS | Baseline Switch 2226 Plus User Guide | 3Com |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |