DataSheetWiki


LM137HVK-QMLV fiches techniques PDF

National Semiconductor - 3-Terminal Adjustable Negative Regulators (High Voltage)

Numéro de référence LM137HVK-QMLV
Description 3-Terminal Adjustable Negative Regulators (High Voltage)
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM137HVK-QMLV fiche technique
May 1999
LM137HV/LM337HV
3-Terminal Adjustable Negative Regulators
(High Voltage)
General Description
The LM137HV/LM337HV are adjustable 3-terminal negative
voltage regulators capable of supplying in excess of −1.5A
over an output voltage range of −1.2V to −47V. These regu-
lators are exceptionally easy to apply, requiring only 2 exter-
nal resistors to set the output voltage and 1 output capacitor
for frequency compensation. The circuit design has been op-
timized for excellent regulation and low thermal transients.
Further, the LM137HV series features internal current limit-
ing, thermal shutdown and safe-area compensation, making
them virtually blowout-proof against overloads.
The LM137HV/LM337HV serve a wide variety of applica-
tions
including
local
on-card
regulation,
programmable-output voltage regulation or precision current
regulation. The LM137HV/LM337HV are ideal complements
to the LM117HV/LM317HV adjustable positive regulators.
Features
n Output voltage adjustable from −1.2V to −47V
n 1.5A output current guaranteed, −55˚C to +150˚C
n Line regulation typically 0.01%/V
n Load regulation typically 0.3%
n Excellent thermal regulation, 0.002%/W
n 77 dB ripple rejection
n Excellent rejection of thermal transients
n 50 ppm/˚C temperature coefficient
n Temperature-independent current limit
n Internal thermal overload protection
n P+ Product Enhancement tested
n Standard 3-lead transistor package
n Output short circuit protected
Typical Applications
Adjustable Negative Voltage Regulator
DS009066-1
DS009066-25
C1 = 1 µF solid tantalum or 10 µF aluminum electrolytic required for stability. Output capacitors in the range of 1 µF to 1000 µF of aluminum or tantalum
electrolytic are commonly used to provide improved output impedance and rejection of transients.
*C2 = 1 µF solid tantalum is required only if regulator is more than 4" from power-supply filter capacitor.
© 1999 National Semiconductor Corporation DS009066
www.national.com

PagesPages 10
Télécharger [ LM137HVK-QMLV ]


Fiche technique recommandé

No Description détaillée Fabricant
LM137HVK-QMLV 3-Terminal Adjustable Negative Regulators (High Voltage) National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche