DataSheetWiki


LM137H fiches techniques PDF

National Semiconductor - 3-Terminal Adjustable Negative Regulators

Numéro de référence LM137H
Description 3-Terminal Adjustable Negative Regulators
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM137H fiche technique
May 1999
LM137/LM337
3-Terminal Adjustable Negative Regulators
General Description
The LM137/LM337 are adjustable 3-terminal negative volt-
age regulators capable of supplying in excess of −1.5A over
an output voltage range of −1.2V to −37V. These regulators
are exceptionally easy to apply, requiring only 2 external re-
sistors to set the output voltage and 1 output capacitor for
frequency compensation. The circuit design has been opti-
mized for excellent regulation and low thermal transients.
Further, the LM137 series features internal current limiting,
thermal shutdown and safe-area compensation, making
them virtually blowout-proof against overloads.
The LM137/LM337 serve a wide variety of applications in-
cluding local on-card regulation, programmable-output volt-
age regulation or precision current regulation. The LM137/
LM337 are ideal complements to the LM117/LM317
adjustable positive regulators.
Features
n Output voltage adjustable from −1.2V to −37V
n 1.5A output current guaranteed, −55˚C to +150˚C
n Line regulation typically 0.01%/V
n Load regulation typically 0.3%
n Excellent thermal regulation, 0.002%/W
n 77 dB ripple rejection
n Excellent rejection of thermal transients
n 50 ppm/˚C temperature coefficient
n Temperature-independent current limit
n Internal thermal overload protection
n P+ Product Enhancement tested
n Standard 3-lead transistor package
n Output is short circuit protected
LM137 Series Packages and Power
Capability
Device
Package
LM137/337
LM337
LM337
TO-3 (K)
TO-39 (H)
TO-220 (T)
SOT-223
(MP)
Rated
Power
Dissipation
20W
2W
15W
2W
Design
Load
Current
1.5A
0.5A
1.5A
1A
Typical Applications
Adjustable Negative Voltage Regulator
Comparison between SOT-223 and
D-Pak (TO-252) Packages
Full output current not available at high input-output voltages
DS009067-1
C1 = 1 µF solid tantalum or 10 µF aluminum electrolytic required for
stability
*C2 = 1 µF solid tantalum is required only if regulator is more than 4" from
power-supply filter capacitor
Output capacitors in the range of 1 µF to 1000 µF of aluminum or tantalum
electrolytic are commonly used to provide improved output impedance and
rejection of transients
Scale 1:1
DS009067-31
© 1999 National Semiconductor Corporation DS009067
www.national.com

PagesPages 11
Télécharger [ LM137H ]


Fiche technique recommandé

No Description détaillée Fabricant
LM137 3-Terminal Adjustable Negative Regulators National Semiconductor
National Semiconductor
LM137 NEGATIVE VOLTAGE REGULATORS THREE-TERMINAL ADJUSTABLE STMicroelectronics
STMicroelectronics
LM137 1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE REGULATOR Seme LAB
Seme LAB
LM137 LM137 LM337-N 3-Terminal Adjustable Negative Regulators (Rev. E) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche