|
|
PDF LC99350 Data sheet ( Hoja de datos )
| Número de pieza | LC99350 | |
| Descripción | 2.5-inch Frame Transfer CCD 1.1M Pixel Color Image Sensor | |
| Fabricantes | Sanyo Semiconductor Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC99350 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : ENN*6282
www.DataSheet4U.com
Preliminary
LC99350
2/5-Inch Frame Transfer CCD
1.1M Pixel Color Image Sensor
Overview
The LC99350 is a low-cost frame transfer CCD (charge-
coupled device) solid-state imaging element that features
1.1M pixels in a 2/5-inch optical size. It supports both
progressive scan readout of all 1296 × 846 pixels as well
as a real-time monitor mode with data compressed by 1/3.
Applications
PC cameras, TV telephones, image input units, and digital
still cameras
• Consists of a 1392 × 888-pixel imaging block and a
1392 × 296-pixel storage block
• Three-phase drive used for the imaging and storage
blocks, and 2-phase drive for the horizontal transfer
block
• Built-in high-sensitivity output amplifier
Package Dimensions
unit: mm
3250
Features
• Progressive scan readout
• Real-time compressed-data monitor mode
• Variable speed electronic shutter
• Horizontal dual readout adopted (Since the even and odd
pixels on a single horizontal line are read out in two
operations, a line memory is required for signal
processing.)
14.3
2.04
R0.5
Optical Center
7.15
[LC99350]
2.0
1.49
1.075
Glass
Resin
Sensor
R0.6
R0.25
10.16
0.7 2.54
R0.3
Image Sensor Element Structure
• Effective pixels [Total pixels]: 1296 × 864 [1392 × 888]
(H×V)
• Number of optical blacks:
Horizontal: 84 at the front, 12 at the rear
Vertical direction: 12 at the top, 12 at the bottom
• Dummy bits: Horizontal: 6 pixels
• Unit cell size: 4.5 µm × 4.5 µm (H×V)
• Primary color mosaic filters (RGB)
• Parallel gate CCD sensor
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O1899RM (OT) No. 6282-1/5
1 page  
www.DataSheet4U.com
LC99350
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 1999. Specifications and information herein are subject
to change without notice.
PS No. 6282-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LC99350.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC99350 | 2.5-inch Frame Transfer CCD 1.1M Pixel Color Image Sensor | Sanyo Semiconductor Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |