|
|
PDF NJSE036AT Data sheet ( Hoja de datos )
| Número de pieza | NJSE036AT | |
| Descripción | LED | |
| Fabricantes | NICHIA CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NJSE036AT (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Nichia STS-DA1-0227
<Cat.No.080613>
SPECIFICATIONS FOR NICHIA CHIP TYPE BLUISH-GREEN LED
MODEL : NJSE036AT
NICHIA CORPORATION
-0-
1 page  
Nichia STS-DA1-0227
<Cat.No.080613>
7.CAUTIONS
(1) Moisture Proof Package
www.DataSheet4U.com
· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.
There is a possibility that this can cause exfoliation of the contacts and damage the optical
characteristics of the LEDs. For this reason, the moisture proof package is used to keep moisture
to a minimum in the package.
· The moisture proof package is made of an aluminum moisture proof bag. A package of
a moisture absorbent material (silica gel) is inserted into the aluminium moisture proof bag.
The silica gel changes its color from blue to pink as it absorbs moisture.
(2) Storage
· Storage Conditions
Before opening the package :
The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within
a year. When storing the LEDs, moisture proof packaging with absorbent material (silica gel)
is recommended.
After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered
within 168 hours (7days) after opening the package. If unused LEDs remain, they should be
stored in the moisture proof packages, such as sealed containers with packages of moisture
absorbent material (silica gel). It is also recommended to return the LEDs to the original
moisture proof bag and to reseal the moisture proof bag again.
· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following condition.
Baking treatment : more than 24 hours at 65 ± 5°C
· Nichia LED electrodes are gold plated. The gold surface may be affected by environments which
contain corrosive substances. Please avoid conditions which may cause the LED to corrode,
tarnish or discolor. This corrosion or discoloration may cause difficulty during soldering operations.
It is recommended that the User use the LEDs as soon as possible.
· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
condensation can occur.
-4-
5 Page 
Forward Voltage vs.
Forward Current
1000
900
350
Ta=25°C
100
50
10
2.5 3.0 3.5 4.0 4.5 5.0 5.5
Forward Voltage VF (V)
Ambient Temperature vs.
Forward Voltage
5.5
5.0 IFP=350mA
4.5
4.0
3.5
3.0
2.5
-40 -20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Forward Current vs.
Relative Luminous Flux
2.5
Ta=25°C
2.0
1.5
1.0
0.5
0
0 200 400 600 800 1000
Forward Current IFP (mA)
Ambient Temperature vs.
Relative Luminous Flux
2.0
IFP=350mA
1.0
0.5
0.2
-40 -20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Duty Ratio vs.
Allowable Forward Current
1000
900
650
Ta=25°C
200
100
1
½Pulse Width <= 10msec.
5 10 20 50 100
Duty Ratio (%)
Ambient Temperature vs.
Allowable Forward Current
800
650
600
452
400
352
Rja=35°C/W
200 Rja=45°C/W
0
0 20 40 60 80 100
Ambient Temperature Ta (°C)
Model
NJSE036A
NICHIA CORPORATION Title CHARACTERISTICS
No. 080603818281
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet NJSE036AT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NJSE036AT | LED | NICHIA CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |