DataSheetWiki


LM124J fiches techniques PDF

National Semiconductor - Low Power Quad Operational Amplifiers

Numéro de référence LM124J
Description Low Power Quad Operational Amplifiers
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM124J fiche technique
March 2000
LM124/LM224/LM324/LM2902
Low Power Quad Operational Amplifiers
General Description
The LM124 series consists of four independent, high gain,
internally frequency compensated operational amplifiers
which were designed specifically to operate from a single
power supply over a wide range of voltages. Operation from
split power supplies is also possible and the low power sup-
ply current drain is independent of the magnitude of the
power supply voltage.
Application areas include transducer amplifiers, DC gain
blocks and all the conventional op amp circuits which now
can be more easily implemented in single power supply sys-
tems. For example, the LM124 series can be directly oper-
ated off of the standard +5V power supply voltage which is
used in digital systems and will easily provide the required
interface electronics without requiring the additional ±15V
power supplies.
Unique Characteristics
n In the linear mode the input common-mode voltage
range includes ground and the output voltage can also
swing to ground, even though operated from only a
single power supply voltage
n The unity gain cross frequency is temperature
compensated
n The input bias current is also temperature compensated
Advantages
n Eliminates need for dual supplies
n Four internally compensated op amps in a single
package
n Allows directly sensing near GND and VOUT also goes
to GND
n Compatible with all forms of logic
n Power drain suitable for battery operation
Features
n Internally frequency compensated for unity gain
n Large DC voltage gain 100 dB
n Wide bandwidth (unity gain) 1 MHz
(temperature compensated)
n Wide power supply range:
Single supply 3V to 32V
or dual supplies ±1.5V to ±16V
n Very low supply current drain (700 µA) — essentially
independent of supply voltage
n Low input biasing current 45 nA
(temperature compensated)
n Low input offset voltage 2 mV
and offset current: 5 nA
n Input common-mode voltage range includes ground
n Differential input voltage range equal to the power
supply voltage
n Large output voltage swing 0V to V+ − 1.5V
Connection Diagram
Dual-In-Line Package
DS009299-1
Top View
Order Number LM124J, LM124AJ, LM124J/883 (Note 2), LM124AJ/883 (Note 1), LM224J,
LM224AJ, LM324J, LM324M, LM324AM, LM2902M, LM324N, LM324AN, LM324MT, LM324MTX or LM2902N
LM124AJRQML and LM124AJRQMLV(Note 3)
See NS Package Number J14A, M14A or N14A
Note 1: LM124A available per JM38510/11006
Note 2: LM124 available per JM38510/11005
© 2000 National Semiconductor Corporation DS009299
www.national.com

PagesPages 19
Télécharger [ LM124J ]


Fiche technique recommandé

No Description détaillée Fabricant
LM124 Low Power Quad Operational Amplifiers National Semiconductor
National Semiconductor
LM124 Low power quad op amps NXP Semiconductors
NXP Semiconductors
LM124 LOW POWER QUAD OPERATIONAL AMPLIFIERS STMicroelectronics
STMicroelectronics
LM124 LMx24 LMx24x LMx24xx LM2902 LM2902x LM2902xx LM2902xxx Quadruple Operational Amplifiers (Rev. W) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche