DataSheetWiki


LM111N fiches techniques PDF

NXP Semiconductors - Voltage comparator

Numéro de référence LM111N
Description Voltage comparator
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





LM111N fiche technique
Philips Semiconductors Linear Products
Voltage comparator
Product specification
LM111/211/311/
LM311B
DESCRIPTION
The LM111 series are voltage comparators that have input currents
approximately a hundred times lower than devices like the µA710.
They are designed to operate over a wider range of supply voltages;
from standard ±15V op amp supplies down to a single 3V supply.
Their output is compatible with RTL, DTL, and TTL as well as MOS
circuits. Further, they can drive lamps or relays, switching voltages
up to 50V at currents as high as 50mA.
Both the inputs and the outputs of the LM111 series can be isolated
from system ground, and the output can drive loads referred to
ground, the positive supply, or the negative supply. Offset balancing
and strobe capability are provided and outputs can be wire-ORed.
Although slower than the µA710 (200ns response time vs 40ns), the
devices are also much less prone to spurious oscillations. The LM111
series has the same pin configuration as the µA710 series.
FEATURES
Operates from single 3V supply (LM311B)
Maximum input bias current: 150nA (LM311—250nA)
Maximum offset current: 20nA (LM311—50nA)
Differential input voltage range: ±30V
Power consumption: 135mW at ±15V
High sensitivity—200V/mV
Zero crossing detector
PIN CONFIGURATION
D, FE, N PACKAGES
GND 1
INPUT 2
INPUT 3
V– 4
+
8 V+
7 OUTPUT
6 BAL/STROBE
5 BALANCE
APPLICATIONS
Precision squarer
Positive/negative peak detector
Low voltage adjustable reference supply
Switching power amplifier
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Plastic Dual In-Line Package (DIP)
TEMPERATURE RANGE
-55°C to +125°C
-25°C to +85°C
0 to +70°C
0 to +70°C
-25°C to +85°C
-55°C to +125°C
0 to +70°C
0 to +70°C
ORDER CODE
LM111N
LM211N
LM311D
LM311N
LM211D
LM111FE
LM311BD
LM311BN
DWG #
0404B
0404B
0174C
0404B
0174C
0580A
0174C
0404B
August 31, 1994
273 853-0927 13721

PagesPages 4
Télécharger [ LM111N ]


Fiche technique recommandé

No Description détaillée Fabricant
LM111 Voltage Comparator National Semiconductor
National Semiconductor
LM111 Voltage comparator NXP Semiconductors
NXP Semiconductors
LM111 VOLTAGE COMPARATORS STMicroelectronics
STMicroelectronics
LM111 Voltage comparator NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche