DataSheetWiki

DS1845 Datasheet دیتاشیت PDF دانلود

دیتاشیت - Dallas Semiconductor - Dual NV Potentiometer and Memory

شماره قطعه DS1845
شرح مفصل Dual NV Potentiometer and Memory
تولید کننده Dallas Semiconductor 
آرم Dallas Semiconductor 


1 Page

		

No Preview Available !

DS1845 شرح
www.DataSheet4U.com
DS1845
Dual NV Potentiometer and Memory
www.dalsemi.com
FEATURES
Two linear taper potentiometers
DS1845-010 one 10k, 100 position &
one 10k, 256 position
DS1845-050 one 10k, 100 position &
one 50k, 256 postition
DS1845-100 one 10k, 100 position &
one 100k, 256 position
256 bytes of EEPROM memory
Access to data and potentiometer control via
a 2-wire interface
External Write Enable pin to protect data and
potentiometer settings
Nonvolatile wiper storage in 2 bytes of
address space
Operates from 3V or 5V supplies
Packaging: Flip Chip Package, 16-ball
STPBGA, 14-pin TSSOP
Industrial operating temperature: -40ºC to
+85ºC
Programming temperature: 0ºC to +70ºC
PIN ASSIGNMENT
SDA
SCL
A0
A1
A2
WP
GND
1
2
3
4
5
6
7
14 Vcc
13 H0
12 W1
11 H1
10 L1
9 W0
8 L0
14-Pin TSSOP (173 mil)
14-Pin Flip Chip (100 x 100 mils)
16-BALL STPBGA (4 x 4 mm)
See Mech. Drawing Section
PIN DESCRIPTION
VCC
GND
- 3V or 5V Power Supply Input
- Ground
SDA
- 2-wire Serial Data
Input/Output
SCL - 2-wire Serial Clock Input
WP - Write Protect Input
A0, A1, A2 - Address Inputs
H0, H1
- High-End of Potentiometer
L 0, L1
- Low-End of Potentiometer
W0, W1
- Wiper Terminal of
Potentiometer
DESCRIPTION
The DS1845 Dual NV Potentiometer and Memory consists of one=100-position linear taper
potentiometer, one=256-position linear taper potentiometer, 256 bytes of EEPROM memory, and a 2-wire
interface. The device provides an ideal method for setting bias voltages and currents in control
applications using a minimum of circuitry. The EEPROM memory allows a user to store configuration
or calibration data for a specific system or device as well as provide control of the potentiometer wiper
settings. Any type of user information may reside in the first 248 bytes of this memory. The next two
addresses of EEPROM memory are for potentiometer settings and the remaining 6 bytes of memory are
reserved. These reserved and potentiometer registers should not be used for data storage. Access to this
EEPROM is via an industry standard 2-wire bus. The interface I/O pins consist of SDA and SCL. The
wiper position of the DS1845, as well as EEPROM data, can be hardware write-protected using the Write
Protect (WP) input pin.
1 of 13
051900

قانون اساسیصفحه 13
دانلود [ DS1845 دیتاشیت ]



دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
DS1841 Temperature-Controlled Maxim Integrated Products
Maxim Integrated Products
DS1842 Bias Output Stage Maxim Integrated Products
Maxim Integrated Products
DS1842A Bias Output Stage Maxim Integrated Products
Maxim Integrated Products
DS1843 RSSI Burst-Mode Sample-and-Hold Circuit Maxim Integrated Products
Maxim Integrated Products

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2018   |   تماس با ما  |   جستجو