|
|
Número de pieza | HMC620LC4 | |
Descripción | GaAs MMIC I/Q MIXER | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC620LC4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v01.1007
Typical Applications
The HMC620LC4 is ideal for:
• Point-to-Point
• Point-to-Multi-Point Radio
• WiMAX & Fixed Wireless
8www.DataSheet4U.c•omVSAT
Functional Diagram
HMC620LC4
GaAs MMIC I/Q MIXER
3 - 7 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
High Image Rejection: 32 dB
High LO to RF Isolation: 43 dB
High Input IP3: +22 dBm
24 Lead Ceramic 4x4 SMT Package: 16mm2
General Description
The HMC620LC4 is a compact I/Q MMIC mixer in a
leadless “Pb free” RoHS compliant SMT package, which
can be used as either an Image Reject Mixer (IRM) or
a Single Sideband Upconverter. The mixer utilizes two
standard Hittite double balanced mixer cells and a 90
degree hybrid fabricated in a GaAs MESFET process. A
low frequency quadrature hybrid was used to produce a
100 MHz upper side band (USB) IF output. This product
is a much smaller and more consistent alternative
to hybrid style Image Reject Mixers and Single
Sideband Upconverter assemblies. The HMC620LC4
is compatible with high volume surface mount
manufacturing techniques.
Electrical Specifications, TA = +25 °C, IF= 100 MHz, LO = +15 dBm*
Parameter
Min.
Typ.
Frequency Range, RF/LO
3-7
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
7.5
Image Rejection
20 27
1 dB Compression (Input)
12
LO to RF Isolation
38 43
LO to IF Isolation
26 30
IP3 (Input)
22
Amplitude Balance
0.1
Phase Balance
3
* Unless otherwise noted, all measurements performed as downconverter.
Max.
9
Min. Typ.
3-4
DC - 3.5
8
28 32
12
38 40
32 33
17
0.3
3
Max.
9
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
8 - 192
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page HMC620LC4
v01.1007
GaAs MMIC I/Q MIXER
3 - 7 GHz
Pin Descriptions
Pin Number
1, 2, 6-8,
10, 13,
17-24
Function
N/C
3, 5, 12,
14, 16
8www.DataSheet4U.com
GND
4 RF
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
These pins and package bottom must be connected
to RF/DC ground.
This pin is DC coupled
and matched to 50 Ohms.
This pin is DC coupled. For applications
9 IF1 not requiring operation to DC, this port should be
DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not
11 IF2 source/sink more than 3mA of current or part non-function
and possible part failure will result.
15 LO
This pin is DC coupled
and matched to 50 Ohms.
Interface Schematic
8 - 196
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC620LC4.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC620LC4 | GaAs MMIC I/Q MIXER | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |