DataSheetWiki


HCPL-M452 fiches techniques PDF

Agilent - (HCPL-M452 / HCPL-M453) High Speed Optocouplers

Numéro de référence HCPL-M452
Description (HCPL-M452 / HCPL-M453) High Speed Optocouplers
Fabricant Agilent 
Logo Agilent 





1 Page

No Preview Available !





HCPL-M452 fiche technique
Small Outline, 5 Lead, High
Speed Optocouplers
Technical Data
www.DataSheet4U.com
HCPL-M452
HCPL-M453
Features
• Surface Mountable
• Very Small, Low Profile
JEDEC Registered
Package Outline
• Compatible with Infrared
Vapor Phase Reflow and
Wave Soldering Processes
• Very High Common Mode
Transient Immunity:
15000 V/µs at VCM = 1500 V
Guaranteed (HCPL-M453)
• High Speed: 1 Mb/s
• TTL Compatible
• Guaranteed AC and DC
Performance over
Temperature: 0°C to 70°C
• Open Collector Output
• Recognized Under the
Component Program of
U.L. (File No. E55361) for
Dielectric Withstand Proof
Test Voltage of 3750 Vac, 1
Minute
• Lead Free Option
Description
These small outline high CMR,
high speed, diode-transistor opto-
couplers are single channel
devices in a five lead miniature
footprint. They are electrically
equivalent to the following Agilent
optocouplers:
SO-5 Package
HCPL-M452
HCPL-M453
Standard DIP
HCPL-4502
HCPL-4503
SO-8 Package
HCPL-0452
HCPL-0453
(Note: These devices equivalent to 6N135/6N136 devices but without the base lead.)
The SO-5 JEDEC registered
(MO-155) package outline does
not require “through holes” in a
PCB. This package occupies
approximately one-fourth the
footprint area of the standard
dual-in-line package. The lead
profile is designed to be
compatible with standard
surface mount processes.
These diode-transistor
optocouplers use an insulating
layer between the light emitting
diode and an integrated photon
detector to provide electrical
insulation between input and
output. Separate connections for
the photodiode bias and output
transistor collector increase the
speed up to a hundred times
CAUTION: The small device geometries inherent to the design of this bipolar component increase the component's
susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken
in handling and assembly of this component to prevent damage and/or degradation which may be induced by
ESD.

PagesPages 8
Télécharger [ HCPL-M452 ]


Fiche technique recommandé

No Description détaillée Fabricant
HCPL-M452 (HCPL-M452 / HCPL-M453) High Speed Optocouplers Agilent
Agilent
HCPL-M453 (HCPL-M452 / HCPL-M453) High Speed Optocouplers Agilent
Agilent
HCPL-M454 Ultra High CMR / Small Outline / 5 Lead / High Speed Optocoupler Hewlett-Packard
Hewlett-Packard
HCPL-M456 Intelligent Power Module and Gate Drive Interface Optocouplers Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche