|
|
PDF AD1883 Data sheet ( Hoja de datos )
| Número de pieza | AD1883 | |
| Descripción | High Definition Audio SoundMAX Codec | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AD1883 (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
FEATURES
Microsoft Vista Premium Logo for notebook
90+ dB audio outputs, 85 dB audio inputs
WLP 3.0 and 4.0
2 stereo headphone amplifiers
Internal 32-bit arithmetic for greater accuracy
www.DataSheeItm4Up.ecdomance and presence detection on all jacks
Full analog mixer with DAC inputs
3 independent microphone bias pins
Digital and analog PCBeep
3 general-purpose digital I/O (GPIO) pins
3.3 V analog supply voltage
1.7 V to 1.9 V or 3.3 V digital supply voltages
1.5 V or 3.3 V HD Audio link signaling voltage
Advanced power management modes
48-lead, RoHs compliant LFCSP_VQ package
192 kHz DACs/ADCs
2 independent stereo DAC/ADC pairs
Simultaneous record of 2 stereo channels
Simultaneous playback of 2 stereo channels
Independent 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz
sample rates
16-, 20-, and 24-bit resolution
Selectable stereo mixer on outputs
High Definition Audio
SoundMAX Codec
AD1883
STEREO DIGITAL MICROPHONE INTERFACE
2 digital microphone channels
Supports 1 or 2 microphones per pin
Selectable clock rates of 1.5 MHz, 2.0 MHz, and 3.0 MHz
Mono and stereo array support
8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz,
48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz
sample rates
16-, 20-, and 24-bit resolution
S/PDIF OUTPUT
Supports 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and
192 kHz sample rates
16-, 20-, and 24-bit data; PCM and AC3 formats
Digital PCM gain control
AUXILIARY PINS
Stereo CD/auxiliary I/O port with ground sense
Stereo auxiliary/dock I/O port
Mono out pin for internal speakers or telephony
H DAC0
D
DAC1
A
U
D
I
O S/PDIF-OUT
I
N
T DIGITAL
E PCBEEP
R
F
A
C ADC0
E
ADC1
AD1883
⌺ HP
⌺ HP
⌺
⌺
⌺
⌺
PORT A
PORT D
MONO OUT
PORT E
PORT F
PCBEEP
PORT B
PORT C
DIGITAL
MICROPHONE
DM_1/2
DM_2
DM_CLK
Figure 1. Functional Block Diagram
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2008 Analog Devices, Inc. All rights reserved.
1 page  
Parameter
DIGITAL-TO-ANALOG CONVERTERS
Resolution
Gain Error (Full-Scale Span Relative to Nominal Input Voltage)1
Interchannel Gain Mismatch (Difference of Gain Errors)
Total Audible Out-of-Band Energy (Measured from 0.6 × fS to 20 kHz)1
DAC Crosstalk (Input L, Zero R, Measure R_OUT; Input R, Zero L, Measure L_OUT)1
DAC VOLUMES
Step Size
Output Gain/Attenuation Range
Mute Attenuation of 0 dB Fundamental1
ADC VOLUMES
www.DataSheet4US.ctoemp Size
PGA Gain/Attenuation Range
ANALOG MIXER
Signal-to-Noise Ratio Input to Output—Ports B, C, E, or F to Port D Output
Step Size: All Mixer Inputs
Input Gain/Attenuation Range: All Mixer Inputs
ANALOG LINE LEVEL OUTPUTS
Full-Scale Output Voltage
Ports A, D, E, F, and Mono Out
ANALOG HP DRIVE OUTPUTS
Full-Scale Output Voltage
Output Impedance1
External Load Impedance1
Output Capacitance1
External Load Capacitance
Ports A and D
ANALOG INPUTS
Input Voltages—Ports B, C, E, or F
Output Impedance1
External Load Impedance1
Output Capacitance1
External Load Capacitance1
Mic Boost = 0 dB
Min
–58.5
–58.5
–34.5
1.0
2.83
10
1.0
2.83
32
Input Voltages—Microphone Boost
Amplifier, Ports B, C, or E
Mic Boost = 10 dB
Mic Boost = 20 dB
Mic Boost = 30 dB
Input Impedance
PCBeep
Ports B, C, E (Mic Boost = 0 dB)
Port F
Input Capacitance1
Typ
24
–85
–95
1.5
–80
1.5
90
–1.5
190
15
15
1
2.83
0.316
0.894
0.1
0.283
0.032
0.089
23
150
45
5
AD1883
Max
±10
±0.5
0
+22.5
+12.0
1000
0.5
1000
Unit
Bits
%
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
V rms
V p-p
Ω
kΩ
pF
pF
V rms
V p-p
Ω
Ω
pF
pF
V rms
V p-p
V rms
V p-p
V rms
V p-p
V rms
V p-p
kΩ
kΩ
kΩ
7.5 pF
Rev. 0 | Page 5 of 20 | April 2008
5 Page 
AD1883
Table 5. Pin Function Descriptions (Continued)
Mnemonic
Pin No. I/O
Description
FILTER/MIC_BIAS
VREF _FLT
MIC_BIAS-B
MIC_BIAS-C
MIC_BIAS_IN
5.0 V or 3.3 V
27 O Voltage Reference Filter.
28 O Switchable Microphone Bias. For use with Port B (Pins 21, 22).
29 O Switchable Microphone Bias. For use with Port C (Pins 23, 24).
Both MIC bias pins are capable of:
High-Z, 0 V, 1.65 V, 3.7 V, and 3.9 V (with 5.0 V on Pin 33)
High-Z, 0 V, 1.65 V, 2.86 V, and 3.0 V (with 3.3 V on Pin 33).
33 I Source Power for Microphone Bias Boost Circuitry.
Connect this pin to 5.0 V via a low-pass filter. When connected this way the AD1883 is
capable of providing 3.9 V as a mic bias to all of the mic bias pins (except on Pin 31).
www.DataSheet4U.com
POWER AND GROUND
DVCORE 1.7 V to 1.9 V or
FILTER
1
If 5 V is not available, connect this pin to 3.3 V (AVDD) via a low-pass filter.
I/O CAUTION: DO NOT APPLY 3.3 V TO THIS PIN! Filter connection for internal core
voltage regulator.
DVIO 1.5 V or 3.3 V
3
DVSS
7
DVDD 1.7 V to 1.9 V or 3.3 V 9
I
I
I
AVDD 3.3 V
AVSS
25, 38
I
26, 42
I
If Pin 9 is connected to 3.3V DVDD, this pin must be connected to filter caps: 10μF,
1.0 μF, and 0.1μF connected in parallel between Pin 1 and DVSS (Pin 7). Direct, filtered
1.7 V to 1.9 V DVDD can be applied to Pin 1 to lower the digital power requirements.
Pin 9 MUST be connected to Pin 1 in this case.
Link Digital I/O Voltage Reference. 3.3 V ± 10% or 1.5 V ± 5.5%
Digital Supply Return (Ground).
Digital Supply Voltage 3.3 V ± 10%. This is regulated down to DVCORE on Pin 1 to
supply the internal digital core internal to the AD1883. Direct, filtered 1.7 V to 1.9 V
DVDD may be applied to Pin 1 to lower the digital power requirements. Pin 9 MUST be
connected to Pin 1 in this case.
CAUTION: DO NOT APPLY 5 V TO THESE PINS! Analog Supply Voltage 3.3 V ± 5%.
Note: AVDD supplies should be well regulated and filtered as supply noise degrades
audio performance.
Analog Supply Return (Ground). AVSS should be connected to DVSS using a
conductive trace under, or close to, the AD1883.
The symbols used in this table are defined as: I = input, O = output, LI = line level input, LO = line level output, HP = output capable of driving
headphone load, MIC = input supports microphones with MIC bias and boost amplifier.
Rev. 0 | Page 11 of 20 | April 2008
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet AD1883.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AD1881 | AC97 SoundMAX Codec | Analog Devices |
| AD1882 | High Definition Audio SoundMAX Codec | Analog Devices |
| AD1883 | High Definition Audio SoundMAX Codec | Analog Devices |
| AD1884 | High Definition Audio SoundMAX Codec | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |