DataSheetWiki


V600-HAM81 fiches techniques PDF

Omron - Intelligent Flag I/II

Numéro de référence V600-HAM81
Description Intelligent Flag I/II
Fabricant Omron 
Logo Omron 





1 Page

No Preview Available !





V600-HAM81 fiche technique
Intelligent Flag I/II
V600-HA
Innovative RFID Electronic Flags to
Replace Mechanical Flag and Kanban
Systems
• Doesn't need a program and can be used like a sensor.
• Advanced line construction at minimal cost.
• Saves space.
• Precise installation not required (Transmission distance:
www.DataSh1e0et04Um.cmommax.).
• A verification function provided on multi-functional type.
• Addition of 16-bit models to the series responds to applica-
tions from Kanban to quality control.
• Equipped with a wiring reduction mode and communications
parity check function (16-bit models).
• Both NPN and PNP output available.
• FCC certified.
Ordering Information/Specifications
Amplifier
Type
Read-only (8-bit)
Multi-functional (8-bit)
Read-only (16-bit)
Item
Model V600-HAR91
V600-HAR81
V600-HAM91
V600-HAM81
V600-HAR92
Power supply
24 VDC ±10%, ripple (p-p): 10%
Current consumption 130 mA max.
Input
Transistor output or contact output
Short-circuit current: 3 mA (typical) (IN terminal and 0-V short-circuit)
OFF voltage:
15 to 30 VDC
ON voltage:
0 to 5 VDC
Input impedance: 8.2 k
Applied voltage: 30 VDC max.
Transistor output
OFF voltage:
15 to 30 VDC
Input impedance:
8.2 k
Short-circuit current:
3 mA (typical) (for 0-V short-circuit of
INHIBIT/TRG)
ON voltage:
0 to 5 VDC
Applied voltage:
30 VDC max.
Output
NPN open collector
output, 20 mA max. at
30 VDC, residual volt-
age: 2 V max.
PNP open collector
output, 20 mA max.
at 30 VDC, residual
voltage: 2 V max.
NPN open collector PNP open collector out- NPN open collector output, 20 mA
output, 20 mA max. at put, 20 mA max. at 30 max. at 30 VDC, residual voltage: 2 V
30 VDC, residual volt- VDC, residual voltage: 2 V max.
age: 2 V max.
max.
Diagnostic functions Checks for CPU errors and transmission errors
Insulation resistance 50 Mmax. (at 500 VDC) between cable terminals and case
Dielectric strength 500 VAC, 50/60 Hz for 1 min between cable terminals and case (leakage current: 1 mA max.)
2 Intelligent Flag I/II V600-HA

PagesPages 15
Télécharger [ V600-HAM81 ]


Fiche technique recommandé

No Description détaillée Fabricant
V600-HAM81 Intelligent Flag I/II Omron
Omron
V600-HAM81 Intelligent Flag I/II Omron
Omron
V600-HAM81 Intelligent Flag I Omron
Omron

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche