DataSheetWiki


DG2011 fiches techniques PDF

Vishay Siliconix - Single SPDT Analog Switch

Numéro de référence DG2011
Description Single SPDT Analog Switch
Fabricant Vishay Siliconix 
Logo Vishay Siliconix 





1 Page

No Preview Available !





DG2011 fiche technique
DG2011
Vishay Siliconix
Low-Voltage, Low rON, Single SPDT Analog Switch
In SC-89 Package
FEATURES
D Low Voltage Operation
(1.8 V to 5.5 V)
D Low On-Resistance - rON:
1.8 W @ 2.7 V
www.DataSheeDt4UL.ocowmCharge Injection
D Low Voltage Logic Compatible
D SC-89 Package (1.6 x 1.6 mm)
BENEFITS
Pb-free
Available
D Reduced Power Consumption
D Simple Logic Interface
D High Accuracy
D Reduce Board Space
D Guaranteed 2-V Operation
APPLICATIONS
D Cellular Phones
D Communication Systems
D Portable Test Equipment
D Battery Operated Systems
D Sample and Hold Circuits
D ADC and DAC Applications
D Low Voltage Data Acquisition
Systems
DESCRIPTION
The DG2011 is a low on-resistance, single-pole/double-throw
monolithic CMOS analog switch. It is designed for low voltage
applications with guaranteed operation at 2 V. The DG2011 is
ideal for portable and battery powered equipment, requiring
high performance and efficient use of board space. In
additional to the low on-resistance (1.8 @ 2.7 V), charge
injection is less than 10 pC over the entire analog range.
The switch conducts equally well in both directions when on,
and blocks up to the power supply level when off.
The DG2011 is built on Vishay Siliconix’s low voltage JI2
process. An epitaxial layer prevents latchup.
Break-before-make is guaranteed.
The DG2011 represents a breakthrough in packaging
development for analog switching products. The SC-89
package (1.6 x 1.6 mm2) – also know as SOT-666 in the
industry – reduces board spacing by approximately 40% while
obtaining performance comparable to SC-70 analog switch
devices available today.
As a committed partner to the community and the environment,
Vishay Siliconix manufactures this product with the
lead (Pb)-free device terminations. For analog switching
products manufactured with 100% matte tin device
terminations, the lead (Pb)-free “—E3” suffix is being used as
a designator.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
IN
V+
GND
1
2
3
SC-89
Top View
6 NO (Source1)
5 COM
4 NC (Source2)
Ax
Pin 1
Device Marking: Ax
x = Date/Lot Traceability Code
Document Number: 70102
S-50509—Rev. E, 21-Mar-05
Logic
0
1
TRUTH TABLE
NC
ON
OFF
NO
OFF
ON
COMMERCIAL ORDERING INFORMATION
Temp Range
-40 to 85°C
Package
SC-89 (SOT-666)
with Tape and Reel
SC-89 (SOT-666)
Lead (Pb)-Free
with Tape and Reel
Part Number
DG2011DX-T1
DG2011DX-T1—E3
www.vishay.com
1

PagesPages 7
Télécharger [ DG2011 ]


Fiche technique recommandé

No Description détaillée Fabricant
DG201 CMOS Quad SPST Analog Switch Intersil Corporation
Intersil Corporation
DG2011 Single SPDT Analog Switch Vishay Siliconix
Vishay Siliconix
DG2012 Low-Voltage Single SPDT Analog Switch Vishay Siliconix
Vishay Siliconix
DG2015 Dual DPDT Analog Switch Vishay Siliconix
Vishay Siliconix

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche