|
|
PDF D4DS Data sheet ( Hoja de datos )
| Número de pieza | D4DS | |
| Descripción | Safety-Door Switch | |
| Fabricantes | Omron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de D4DS (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
D4DS
Safety-Door Switch
Compact Safety Switch Saves Space
and is Ideal for a Variety of Doors
H Conforms to EN (TÜV) standards. (positive
opening mechanism is indicated on the
switch)
H Wide standard operating temperature
range: --30 to 70°C
www.DataSheeHt4U.Dcoomuble-insulation structure (with mark)
requires no grounding terminals
H Five-direction Operation Key
H Approved by UL, CSA, BIA and SUVA
standards
H Standards and EC Directives:
• Conforms to the following EC Directives:
Machinery Directive
Low Voltage Directive
EN50047
EN1088
H Approved Standards
Agency
TÜV Rheinland
UL (see note)
BIA
SUVA
Standard
EN60947-5-1
UL508
CSA C22.2 No.14
GS-ET-15
SUVA
File No.
R9551708
(Positive opening:
approved)
E76675
1-conduit: 9509915
2-conduit: 9509913
1-conduit: 6010Z
2-conduit: 6011Z
Note: CSA C22.2 No. 14 compliance was verified and approved
by UL (Marked with ).
Eu
2
1 page  
D4DS
Operation
J CONTACT FORM (DIAGRAMS SHOW STATE WITH KEY INSERTED)
Model
Contact
D4DS-j5jS 1NC/1NO
D4DS-jAjS 2NC
www.DataSheet4U.com
Diagrams
11 Zb 12 11 - 12
23 - 24
23 24
Stroke
Zb
11
21
Operation Key
insertion comple-
tion position
ON
12 11 - 12
21 - 22
22
Stroke
Operation Key
insertion comple-
tion position
ON
Pull-out
completion
position
Remarks
Only NC contact 11-12 has an
approved positive opening
mechanism.
The terminals 11-12 and 23-24 can
be used as unlike poles.
Pull-out
completion
position
NC contacts 11-12 and 21-22 have
an approved positive opening
mechanism.
The terminals 11-12 and 23-24 can
be used as unlike poles.
Note: Terminals are numbered according to EN50013 and contacts are marked according to EN60947-5-1.
J POSITIVE OPENING MECHANISM
1NC/1NO Contact (Slow-Action)
2NC Contact (Slow-Action)
Contact spring
Return spring
Fixed contact (NC)
Movable contact
Fixed contact (NO)
Plunger
Contact spring
Return spring
Fixed contact (NC)
Movable contact
Plunger
Only the NC contacts have a positive opening function.
When metal deposition occurs, the contacts are separated
from each other by pushing in the plunger.
Conforms to EN60947-5-1 Positive Opening
Both NC contacts incorporate a positive
opening function.
When metal deposition occurs, the contacts
are separated from each other by pushing in
the plunger.
Conforms to EN60947-5-1 Positive Opening
Note: The switches are marked with indicating approval for the positive opening mechanism.
6
5 Page 
D4DS
Operation Key Mounting Dimensions
Horizontal/Vertical Mounting
D4DS-K1 or D4DS-K2
Two, M4
Adjustable Mounting (Horizontal) D4DS-K3
Two, M4
Adjustable Mounting (Horizontal/Vertical) D4DS-K5
www.DataSheet4U.com
41±0.1
43±0.1
Two, M4
Securing the Door
When the door is closed (with the Operation Key inserted), the
door (or the Operation Key) may be pushed back across the set
zone due to the door’s weight, the door cushion rubber, etc. If
load is applied to the Operation Key, the door may fail to unlock.
Secure the door with hooks so that it will remain within in the set
zone.
Set zone
(0.5 to 3 mm)
Operation Key
Changes in Head Mounting Direction
By removing the screws on the four corners of the head, the
head can be reset in any of four directions.
When changing the head mounting direction, make sure that the
Operation Key is in the head.
Make sure that no foreign materials penetrate through the
mounting holes of the head. Internal screws of the head must not
be removed, or the internal parts of the head may be lost or
deformed.
Wiring
Do not connect lead wires directly to the terminals. Be sure
to connect the lead wires through insulation tubes and crimp
terminals., and tighten each terminal screw within an
optimum torque range. The lead wires must be an AWG20 to
AWG14 type (i.e., 0.5 to 25 mm2 thick).
dz dia.:
D dia.:
B:
L:
F:
I:
3.7
4.5
7.0
20.2
7.7
9.0 (mm)
D dia.
dz dia.
12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet D4DS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| D4DL | Compact Guard-locking Interlock Safety Door Switch | Omron |
| D4DS | Safety-Door Switch | Omron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |